The CN901 relays the cabinet data signal along a longer copper path. Install it where both cable segments and a suitable power source are available.
Checking the link
The first two LEDs indicate the adjacent and far-side network ports respectively. The third LED indicates power, helping a technician distinguish loss of supply from a missing link.
Tehničke specifikacije
| parametar | specifikacija |
|---|---|
| priključak | RJ45 |
| Typical additional reach | 100 m per repeater, subject to the link |
| snabdijevanje | 110–220 V, 50/60 Hz |
| Konverzija snage | Ugrađeni transformator |
Slike proizvoda i resursi



Specifikacija repetitora signala kartice LINSN CN901 LED ekrana
Često Postavljena Pitanja
1. Where does the CN901 go?
It goes between the sending card and receiving card in the RJ45 signal path.
2. How far does it extend the link?
The specification gives a typical extension of 100 m per relay. Confirm performance with the installed cables.
3. What does LED 3 indicate?
LED 3 shows power. LEDs 1 and 2 indicate the two network-port signals.











