NovaStar MCTRL660 LED Display Controller
The NovaStar MCTRL660 is an independent LED sending box that connects an HDMI or DVI video source to an LED display system. It combines four Gigabit Ethernet outputs with front-panel screen configuration and brightness control, making it suitable for rental screens, live events and fixed installations.
Chwilio am y MCTRL 660? This page covers the standard MCTRL660 model. Check the exact model on your existing unit and match its connections to your display before ordering.
Manylebau allweddol
| Mewnbynnau fideo | 1 × HDMI 1.3 and 1 × single-link DVI |
|---|---|
| LED display outputs | 4 × Gigabit Ethernet RJ45 ports; up to 650,000 pixels per port |
| 8-bit input resolution | Up to 1920 × 1200 at 60 Hz |
| 10-bit / 12-bit input resolution | Up to 1440 × 900 at 60 Hz |
| Custom input examples | 3840 × 600 at 60 Hz or 548 × 3840 at 60 Hz; interlaced inputs are not supported |
| Audio and control | Audio input, USB Type-B control port and UART IN/OUT |
| Cascading | HDMI/DVI cascade outputs; UART control cascading for up to 20 devices |
| Image adjustment | 18-bit grayscale processing; pixel-level brightness and chroma calibration with a calibration platform |
ffynhonnell: NovaStar MCTRL660 specifications V1.4.3. Check the applicable firmware and input mode when planning a system.
Planning your LED screen connection
Start with your screen’s total pixel width and height, the source resolution, refresh rate and color depth. Then check how the load is distributed across the four output ports. A per-port pixel rating alone does not establish whether a particular screen layout and input timing will work.
Confirm the receiving-card model, cabinet configuration and cabling before replacing an existing sender. Share those details with us through the dudalen gyswllt if you need help checking the intended configuration. You can also browse our Cynhyrchion NovaStar ar gyfer cydrannau cysylltiedig.
Cwestiynau a ofynnir yn aml
Can I configure the MCTRL660 without a computer?
Yes. The front-panel LCD and knob support quick screen configuration and manual brightness adjustment. Computer-free configuration refers to setup controls; a video source is still needed to supply the display content.
Does it accept both HDMI and DVI?
Yes. The MCTRL660 provides both HDMI and single-link DVI inputs. Match the source timing and color depth to the supported input mode listed above.
Does a 3840-pixel width mean full 4K input?
No. The documented wide custom mode is 3840 × 600 at 60 Hz. It should not be read as support for a full 3840 × 2160 input.
Beth ddylwn i ei wirio cyn prynu un newydd?
Check the unit’s exact model, source connector, screen pixel dimensions, receiving cards and output-port layout. Do not assume similarly named controller models have identical features.
Lluniau cynnyrch
Lawrlwytho Manyleb
Manyleb Blwch Anfonwr Meistr Annibynnol Arddangosfa LED MCTRL660 NOVASTAR
