Mooncell FOT2000 LED Sending Controller
la Mooncell FOT2000 processes and transmits 4K × 2K @ 60 Hz video for LED displays, with fiber optic transmission and support for active 3D. It provides backup, monitoring and configuration-readback functions for LED control systems.
Teknikaj Specifoj
| parametro | specifo |
|---|---|
| modelo | Mooncell FOT2000 |
| Image processing and transmission | 4K × 2K @ 60 Hz |
| Display transmission | Fiber optic ports |
| Listigitaj enigaj framfrekvencoj | 30 Hz, 50 Hz, 60 Hz kaj 120 Hz |
| 3D functionality | 3D and active 3D display |
| Rezervaj funkcioj | Ethernet loopback backup and dual-master controller backup |
| Brightness expansion | ST_EXT expansion board support for cascaded brightness control and automatic brightness adjustment |
| monitorado | Host software monitoring of sending-card operating parameters and status |
| Configuration and diagnostics | Configuration parameter readback; Gigabit Ethernet error-rate detection |
Installation and System Planning
Match the video source, fiber equipment and receiving-card configuration to the intended screen. The listed 30 Hz, 50 Hz, 60 Hz and 120 Hz input frame rates do not establish 4K processing at every frame rate; the stated 4K × 2K processing rate is 60 Hz.
Ethernet loopback and dual-master backup support configured redundancy arrangements. Host software can monitor operating parameters and status, read back configuration parameters and detect Gigabit Ethernet error rates. Brightness expansion uses the supported ST_EXT board.
Produkta Bildo kaj Specifo Elŝuti
Elŝuta Specifo:
Mooncell Specifo de la Skatolo de Sendado de Regilo de LED-Ekrano FOT2000
Oftaj Demandoj
Does the FOT2000 support 4K processing?
Yes. The FOT2000 supports 4K × 2K @ 60 Hz image processing and transmission. This processing specification should be considered separately from the pixel allocation and wiring of the LED screen.
Can the FOT2000 send display data over fiber?
Yes. It can transmit processed video to LED displays through fiber optic ports. Confirm the matching fiber equipment and system configuration for the installation.
Does the FOT2000 support active 3D?
Yes. Both 3D display and active 3D display are listed functions. A complete installation must also use the appropriate supporting equipment and configuration.
What backup functions are available?
The FOT2000 supports Ethernet loopback backup and dual-master controller backup. Configure the required backup arrangement as part of the screen setup.
Can the FOT2000 control brightness automatically?
It supports the ST_EXT expansion board for cascaded brightness control and automatic brightness adjustment. Confirm the required expansion equipment when planning this function.
