The Mini913K connects to a cabinet carrier through a high-density BTB connector. Its parallel and serial output modes support different module wiring schemes, so the carrier pinout matters when selecting a replacement.
Matching the cabinet board
Check the exact receiver suffix and carrier-board pinout before ordering. Choose the data mode for the installed modules and keep a copy of the cabinet configuration for replacement or service.
ESPECIFICACIONES TÉCNICAS
| Parámetro | Especificación |
|---|---|
| Conexión al gabinete | Conector BTB de alta densidad |
| Carga máxima de la tarjeta | 512 × 512 píxeles |
| RGB output mode | 32 grupos |
| Modo de salida serie | 64 grupos |
| Soporte de conductor | Circuitos integrados controladores generales y PWM |
| Configuration | File readback supported |
Imágenes y recursos de productos


Linsn Especificaciones de la tarjeta receptora Mini913K
Preguntas frecuentes
1. Can this receiver plug into a HUB75 ribbon cable?
The Mini913K uses a high-density board-to-board connection. Verify that the cabinet carrier provides the mating connector and correct signal pinout.
2. What is the maximum load on one card?
The published maximum is 512 × 512 pixels. The installed module layout must also suit the selected RGB or serial output mode.
3. Can I retrieve the cabinet settings before replacing a card?
Yes. Configuration-file readback is supported. Save the working configuration and verify it against the replacement card and modules.

