The TS902 takes a video source from DVI or HDMI and sends mapped data to LED receiving cards. It can read a receiver configuration and broadcast both receiver and display connection files.
Identifying the output configuration
The TS902 V1.1 manual describes four network outputs and up to 2.6 million pixels. Earlier listing text specifies two outputs and 2.3 million pixels. Check the physical board, revision and connector count before planning the load.
ESPECIFICACIONES TÉCNICAS
| Parámetro | Especificación |
|---|---|
| Entradas de video | 1 DVI y 1 HDMI |
| Interfaz de host | PCIe x1 |
| Entrada de audio | 1 |
| Input color depths | 8, 10 or 12 bit |
| Archivos de configuración | RCG readback and broadcast, CON broadcast |
Imágenes y recursos de productos




Linsn Tecnología TS902 Especificación de la tarjeta emisora LED
Preguntas frecuentes
1. How do I know which capacity applies?
Count the network connectors and check the board revision against the matching specification. The published descriptions cover conflicting output counts.
2. Can I retrieve receiver settings through the sender?
Yes. TS902 supports RCG readback as well as sending RCG and CON files.
3. Can I use either HDMI or DVI as the source?
Yes. One input of each type is listed. Check the input format and planned screen mapping separately.













