The NovaStar MCTRL R5 sends video to an LED wall over Ethernet or optical outputs. For a rotated screen layout, the linked controller specification describes using SmartLCT with an A8s or A10s Plus receiving card.
MCTRL R5 input and output specifications
| Hoʻohui | hoakaka |
|---|---|
| Nā hoʻokomo wikiō | 1 × HDMI 1.4, 1 × dual-link DVI and 1 × 6G-SDI |
| Nā hoʻopuka hōʻike | 8 Gigabit Ethernet and 2 optical outputs |
| ʻO ka lōʻihi ka hoʻokō | The listing gives up to 10 km for optical transmission. Confirm the optical modules and fiber link for your installation. |
| Ka manawa hoʻokomo | The specification lists 3840 × 1080 at 60 Hz for 8-bit dual-link DVI. Check the timing table for other inputs and bit depths. |
Pinepine ninau ninau
1. Does dual-link DVI mean there are two DVI inputs?
No. The controller has one DL-DVI input. HDMI and SDI have separate input connectors.
2. What equipment supports arbitrary-angle rotation?
The specification identifies A8s or A10s Plus receiving cards used with SmartLCT. Check the receiver model installed in the cabinet before planning a rotated layout.
3. Can the SDI input accept an interlaced camera feed?
The MCTRL R5 specification excludes interlaced SDI input. Check the camera’s output timing before connecting it.
Nā kiʻi huahana










