The RV216 routes receiving-card data to modules through 16 onboard HUB75-type connections. Cabinets wired for these headers can connect their ribbon cables directly to the receiver.
Checking the receiver revision
Read the marking on the installed board before comparing capacity. The RV216 product description lists up to 512 × 512 pixels. The linked document identifies RV216B and gives a different scan-dependent layout; use the document that matches the board being fitted.
技術仕様
| 製品仕様 | |
|---|---|
| モジュールコネクタ | 16 × HUB75-type |
| RGB出力 | 32グループ |
| RV216 listed maximum | 512 × 512 pixels, subject to module design |
| キャリブレーション | Pixel-by-pixel brightness and single-card color space |
| メンテナンス | Configuration readback and dual-card backup |
製品画像と資料


よくある質問
1. Do I need a separate HUB board?
The RV216 has 16 module connectors onboard. A separate hub is unnecessary when the module ribbons and pinout match.
2. Is the linked RV216B capacity applicable to my RV216?
Check the board marking first. The two descriptions refer to different model labels and screen layouts.
3. Can I recover the cabinet configuration?
Yes. The RV216 supports reading back its configuration file, which is useful before replacing a working receiver.


