NovaStar MRV365 LED Receiving Board Overview
The 노바스타 MRV365 is an LED display receiving board with MOM (Memory on Module) support. It supports the functions of the MRV320 and adds storage for calibration coefficients and LED module information. Its listed single-card resolution is 256 × 226 픽셀.
This receiving card provides multiple data output modes, configuration file readback and operating-status monitoring for compatible LED display systems. Before choosing it for a replacement or new cabinet, check the module wiring, data mode and configuration requirements.
MRV365 Specifications and Functions
| 제품 특장점 | 스펙 |
|---|---|
| 브랜드/모델 | 노바스타 MRV365 |
| 상품 유형 | LED display receiving board / receiving card |
| Single-card resolution | 256 × 226 픽셀 |
| RGBR 데이터 출력 | 16 그룹 |
| RGB 데이터 출력 | 20 그룹 |
| 직렬 데이터 출력 | 64 그룹 |
| 릴레이 제어 | 1 relay control |
| MOM storage | Calibration coefficients and LED module information |
| 구성 도구 | Configuration file readback and program copy |
| 모니터링 | Temperature, Ethernet cable communication status and power supply voltage detection |
| 이미지 조정 | Pixel-by-pixel brightness and chromaticity calibration |
| 디스플레이 기능 | High grayscale, high refresh rate and pre-stored picture setting |
The output groups above describe supported data modes. Confirm the required mode and achievable cabinet resolution for your module configuration before installation.
Memory, Calibration and Maintenance
- MOM support: stores correction coefficients and module information for compatible LED modules.
- 픽셀 단위 보정: supports brightness and chromaticity calibration coefficients for individual LEDs.
- Configuration readback: supports reading back configuration files, alongside program copy functionality.
- Status detection: supports checking temperature, Ethernet communication and supply voltage during system maintenance.
Compatibility Checks Before Ordering
MRV320 function compatibility does not by itself confirm a direct replacement in every cabinet. Check the existing board model, HUB connection and pinout, module driver IC, scan mode, cabinet pixel dimensions, power requirements and controller configuration.
For help selecting a replacement, 내용은 당사 팀에 with the existing card model, clear board and connector photos, module specifications and configuration file if available. You can also browse our LED 수신 카드 or 노바스타 제품.
자주 묻는 질문
What is the NovaStar MRV365 used for?
The MRV365 is a receiving board used in compatible LED display control systems to drive LED modules. It is a receiving card, so the complete display still requires the appropriate controller, modules, power supply and configuration.
What does MOM mean on the MRV365?
MOM stands for Memory on Module. The MRV365 supports storing calibration coefficients and LED module information through this function.
What resolution does one MRV365 support?
The listed single-card resolution is 256 × 226 pixels. Check the actual module layout and operating configuration before specifying a cabinet.
Can the MRV365 replace an MRV320?
The MRV365 supports MRV320 functions and adds MOM support. Confirm the physical connections, module parameters and system configuration before treating it as a replacement.
