NovaStar MRV350-1 LED Display Receiving Card
d' NovaStar MRV350-1 is an LED display receiving card with one relay control channel, configuration file readback and pixel-by-pixel brightness and chromaticity calibration. It supports the MRV320 function set and adds a relay module, making it an option for LED cabinet projects that require these control and monitoring functions.
This listing is for model MRV350-1 Präis, Artikelnummer NOVASTAR-MRV350-1. For replacement or wholesale orders, check the exact board version and cabinet configuration before selecting a quantity.
Key Specifications and Functions
| Fonktioun | MRV350-1 specification |
|---|---|
| Relais Kontroll | 1 relay control channel |
| Single-card resolution | 256 × 226 pixels, as specified for this listing; confirm the required load with your module configuration |
| Data output modes | 16 groups of RGBR’ data, 20 groups of RGB data, or 64 groups of serial data |
| Configuratioun Tools | Configuration file readback and program copy |
| iwwerwaacht | Temperature monitoring, Ethernet cable communication status detection and power supply voltage detection |
| Kalibrierung | Pixel-by-pixel brightness and chromaticity calibration with coefficients for each LED |
| Zousätzlech Funktiounen | Monitor card connection, pre-stored picture setting, high grayscale and high refresh rate support |
The data output figures describe supported modes, not a combined simultaneous output. Actual display performance depends on the connected LED modules and system configuration.
Configuration, Monitoring and Display Adjustment
- Read back configuration files: retrieve the receiving card configuration when maintaining a compatible display system.
- Copy programs: use the supported program copy function when configuring receiving cards.
- Check operating conditions: monitor temperature, supply voltage and Ethernet communication status during troubleshooting.
- Adjust image uniformity: apply per-pixel brightness and chromaticity calibration as part of display setup.
- Set a pre-stored picture: configure the supported stored-image function for your installation.
Check Compatibility Before Ordering
Support for MRV320 functions does not by itself establish a drop-in replacement for every cabinet. Compare the existing card label, board connectors, HUB board, module scan configuration, power requirements, firmware and receiving-card configuration file.
For a replacement check, provide a clear photo of the existing card and its connectors, the LED module specifications, cabinet pixel dimensions and sending controller model. Back up the working display configuration before replacing hardware.
For wholesale quantities or help choosing a receiving card, kontaktéiert eis Equipe. You can also browse LED-Empfangskaarten oder aner NovaStar Produkter.
Oft gestallten Froen
What is the NovaStar MRV350-1 used for?
It is a receiving card for LED display cabinets, providing LED data output together with relay control, calibration and monitoring functions.
How is it related to the MRV320?
The MRV350-1 supports the MRV320 function set and adds a relay module. Confirm hardware connections and configuration compatibility before using it as a replacement.
What resolution does one card support?
This product listing specifies 256 × 226 pixels per card. Verify the required cabinet resolution and module settings before purchase.
Does it support brightness and color calibration?
Yes. It supports pixel-by-pixel brightness and chromaticity calibration, with calibration coefficients for individual LEDs.
How can I check pricing for a bulk order?
Use the current price shown on this page for the listed product, or contact our team with the quantity and delivery destination for a wholesale quotation. Confirm shipping charges and applicable taxes before completing your order.
Produit Spezifizéierung Download
Download NovaStar MRV350 Series Specifications
