Match the card to your LED modules
The DH7516-S is a NovaStar receiving card with 16 HUB75E connectors and support for up to 32 groups of parallel RGB data. Check the module pinout and driver IC before wiring a cabinet.
The pixel limit depends on the driver IC. At 60 Hz, NovaStar specifies up to 512 × 512 pixels with PWM driver ICs and up to 512 × 384 with common driver ICs.
Cabinet setup
Use NovaLCT 5.3.0 or later to configure the cabinet. The card supports pixel-level brightness and chroma calibration, independent RGB gamma adjustment, 3D, 90° rotation and dual-card backup.
| ब्रँड आणि मॉडेल | नोव्हास्टार डीएच७५१६-एस |
|---|---|
| उत्पादन प्रकार | एलईडी डिस्प्ले रिसीव्हिंग कार्ड |
| आउटपुट | १२ × HUB75E |
| समांतर RGB डेटा | कमाल ५ गटांपर्यंत |
| PWM ड्रायव्हर IC सह कमाल भार | ५१२ × ५१२ पिक्सेल, ६० हर्ट्झ |
| सामान्य ड्रायव्हर आयसीसह कमाल भार | ५१२ × ५१२ पिक्सेल, ६० हर्ट्झ |
| कॉन्फिगरेशन सॉफ्टवेअर | NovaLCT 5.3.0 किंवा त्यानंतरची आवृत्ती आणि V-Can |
| डिस्प्ले फंक्शन्स | Pixel-level brightness and chroma calibration, independent RGB gamma, 3D and 90° rotation |
| रिडंडंसी | ड्युअल-कार्ड बॅकअप |
| ईएमसी पालन | वर्ग ब |


तपशील डाउनलोड
सामान्य प्रश्न
Which pixel limit should I use?
Use the limit for the driver IC in your modules. Use 512 × 384 at 60 Hz for common driver ICs and 512 × 512 at 60 Hz for PWM driver ICs, subject to the module and cabinet configuration.
Can I use the same module cables when replacing a card?
Compare the module connector pinout with the DH7516-S pinout in the specification before reusing cables. Save your cabinet configuration before changing cards.



