Temperature and Humidity Sensor for SheenColor Sinjali LED
This sensor is an accessory for SheenColor LED sign control systems. The listed compatible controllers include T-series asynchronous wireless cards and the H1C and W1C vehicle, bus and taxi LED sign controllers.
SheenColor Temperature and Humidity Sensor Specifications
| Parametru | Speċifikazzjoni |
|---|---|
| Tip ta 'sensur | Temperatura u umdità |
| Kompatibilità tal-kontrollur elenkata | SheenColor T series, H1C and W1C |
| Ir-reżistenza tal-ġibda | 10k |
| Kapaċitatur tal-filtru | 0.1µF |
| Aħżen SKU | SheenColor-CTH |
Installazzjoni u Protezzjoni Ambjentali
The product description states waterproof capability, but does not specify an IP rating, immersion depth or exposure limit. Check the required protection for the mounting location and cable connection before installation.
Confirm the sensor connector and controller revision when ordering. Measurement range, accuracy and operating voltage are not specified in the available product information.
Mistoqsijiet Frekwenti
Liema SheenColor controllers are listed as compatible?
The listing names T-series asynchronous LED sign cards, H1C and W1C vehicle controllers. Check the exact hardware revision and connector before installation.
Does this accessory measure both temperature and humidity?
Yes. It is listed as a temperature and humidity sensor for LED sign systems.
What resistor and capacitor are listed?
The product description specifies a 10k pull-up resistor and a 0.1 µF filter capacitor.
Is-sensor huwa reżistenti għall-ilma?
Waterproof capability is stated, but no IP rating or immersion specification is supplied. Confirm suitability for the intended mounting environment.
What is the sensor measurement accuracy?
The available product information does not specify accuracy or measurement range. Confirm these values if your application requires a particular tolerance.
