ਨੋਵਾਸਟਾਰ VX400 ਪ੍ਰੋ ਆਲ-ਇਨ-ਵਨ LED ਵੀਡੀਓ ਕੰਟਰੋਲਰ

NovaStar VX400 Pro ਚਾਰ ਗੀਗਾਬਿਟ ਈਥਰਨੈੱਟ ਪੋਰਟਾਂ 'ਤੇ 2.6 ਮਿਲੀਅਨ LED ਪਿਕਸਲ ਤੱਕ ਡਰਾਈਵ ਕਰਦਾ ਹੈ। ਇਹ ਅਨੁਕੂਲ ਸਰੋਤ ਸੈਟਿੰਗਾਂ ਦੇ ਨਾਲ HDMI 2.0 ਉੱਤੇ 4K60 ਲੈਂਦਾ ਹੈ।

VX400 Pro ਦੀ ਕੀਮਤ ਮੰਗੋ

SKU: Novastar VX400 ਪ੍ਰੋ ਵਰਗ: , ਬ੍ਰਾਂਡ:

Size the wall and check your sources

The NovaStar VX400 Pro combines video switching, scaling and LED sending. Its four Gigabit Ethernet outputs drive up to 2.6 million LED pixels in total. The HDMI 2.0 input accepts signals up to 4096 × 2160 at 60 Hz with compatible source settings.

Count the pixels in the LED wall and map the cabinets to the four outputs. Check the load on each port before you settle on the controller.

ਇਨਪੁੱਟ, ਆਉਟਪੁੱਟ ਅਤੇ ਸਮਰੱਥਾ

ਕੁੱਲ LED ਲੋਡUp to 2.6 million pixels across four Gigabit Ethernet outputs.
Per portUp to 650,000 pixels at 8-bit output, per NovaStar V1.1.1.
ਕੈਨਵਸ ਸੀਮਾਵਾਂUp to 10,240 pixels wide or 8,192 pixels high, within the total and per-port limits.
ਵੀਡੀਓ ਇਨਪੁੱਟ1 × HDMI 2.0 with loop, 2 × HDMI 1.3 and 1 × 3G-SDI with loop.
USB ਪਲੇਬੈਕUSB 3.0 for images and video. The USB source runs at 1920 × 1080 at 60 Hz.
ਫਾਈਬਰ ਪੋਰਟ2 × 10G. OPT 1 can handle input or output. The function of OPT 2 depends on the selected mode.
ਪਰਤਾਂUp to six at 2K × 1K. Larger layers use more of the available resources.
ਕੰਟਰੋਲFront panel, NovaLCT, Unico in a browser or the VICP app.
NovaStar VX400 Pro front controls and rear input and output ports
Front and rear panels of the VX400 Pro.

Choose the operating mode

  • ਵੀਡੀਓ ਕੰਟਰੋਲਰ: Use this mode for source switching, scaling and layers. Check layer sizes before building a preset.
  • ਫਾਈਬਰ ਕਨਵਰਟਰ: Match the optical connection and mode to the devices at both ends. NovaStar lists optical modules as separate purchases.
  • ਬਾਈਪਾਸ: NovaStar specifies zero frames of delay at the controller with ByPass and low latency both enabled. Check the cabinet layout against the low-latency requirements in the specification.

Set up the show

  • Signal and audio: Use EDID settings to match the source. The VX400 Pro has separate analog audio input and output. Cascaded units can synchronize their output to a video input.
  • Cabinet mapping and backup: Check receiving-card compatibility before using free topology. Test any Ethernet or device backup paths before the show. The controller restores its saved settings when power returns.
  • Calibration and 3D: The controller supports pixel-level brightness and color calibration. For 3D, check the emitter and glasses. Side-by-side and top-and-bottom 3D halve the available LED output capacity.

Replacing a VX400?

The VX400 and VX400 Pro have the same rated total LED load. Before opening the rack, check the source cables and the connection you use for each one. The older VX400 has a DVI input. The Pro uses HDMI and 3G-SDI for wired video sources. See the VX400 and VX400 Pro comparison for the port changes.

Documents and pricing

Download the NovaStar VX400 Pro specification (PDF, V1.0.1).

For pricing or a compatibility check, send your pixel map, source list and receiving-card model. ਤੁਸੀਂ ਬ੍ਰਾਊਜ਼ ਵੀ ਕਰ ਸਕਦੇ ਹੋ LED ਵੀਡੀਓ ਪ੍ਰੋਸੈਸਰ ਅਤੇ ਨੋਵਾਸਟਾਰ ਉਤਪਾਦ.

ਕੀ ਮੇਰੇ ਤੋਂ ਕਸਟਮ ਅਤੇ ਟੈਕਸ ਲਏ ਜਾਣਗੇ?

ਸਾਡੀ ਸਾਈਟ 'ਤੇ ਪ੍ਰਦਰਸ਼ਿਤ ਕੀਮਤਾਂ US ਡਾਲਰਾਂ ਵਿੱਚ ਟੈਕਸ-ਮੁਕਤ ਹਨ, ਜਿਸਦਾ ਮਤਲਬ ਹੈ ਕਿ ਇੱਕ ਵਾਰ ਜਦੋਂ ਤੁਸੀਂ ਆਪਣਾ ਆਰਡਰ ਪ੍ਰਾਪਤ ਕਰ ਲੈਂਦੇ ਹੋ ਤਾਂ ਤੁਸੀਂ ਕਰਤੱਵਾਂ ਅਤੇ ਟੈਕਸਾਂ ਦਾ ਭੁਗਤਾਨ ਕਰਨ ਲਈ ਜਵਾਬਦੇਹ ਹੋ ਸਕਦੇ ਹੋ। ਤੁਹਾਡੇ ਆਰਡਰ ਦੀ ਅੰਤਿਮ ਮੰਜ਼ਿਲ 'ਤੇ ਪਹੁੰਚਣ ਤੋਂ ਬਾਅਦ ਆਯਾਤ ਟੈਕਸ, ਡਿਊਟੀਆਂ ਅਤੇ ਸੰਬੰਧਿਤ ਕਸਟਮ ਫੀਸਾਂ ਲਈਆਂ ਜਾ ਸਕਦੀਆਂ ਹਨ, ਜੋ ਤੁਹਾਡੇ ਸਥਾਨਕ ਕਸਟਮ ਦਫ਼ਤਰ ਦੁਆਰਾ ਨਿਰਧਾਰਤ ਕੀਤੀਆਂ ਜਾਂਦੀਆਂ ਹਨ। ਇਹਨਾਂ ਖਰਚਿਆਂ ਅਤੇ ਟੈਕਸਾਂ ਦਾ ਭੁਗਤਾਨ ਤੁਹਾਡੀ ਜ਼ਿੰਮੇਵਾਰੀ ਹੈ ਅਤੇ ਸਾਡੇ ਦੁਆਰਾ ਕਵਰ ਨਹੀਂ ਕੀਤਾ ਜਾਵੇਗਾ। ਅਸੀਂ ਤੁਹਾਡੇ ਦੇਸ਼ ਵਿੱਚ ਕਸਟਮ ਵਿਭਾਗ ਦੁਆਰਾ ਹੋਣ ਵਾਲੀ ਦੇਰੀ ਲਈ ਜ਼ਿੰਮੇਵਾਰ ਨਹੀਂ ਹਾਂ। ਖਰਚਿਆਂ ਦੇ ਹੋਰ ਵੇਰਵਿਆਂ ਲਈ, ਕਿਰਪਾ ਕਰਕੇ ਆਪਣੇ ਸਥਾਨਕ ਕਸਟਮ ਦਫਤਰ ਨਾਲ ਸੰਪਰਕ ਕਰੋ।

ਭਾਰ7 ਕਿਲੋ
ਖਰੀਦਾਰੀ ਠੇਲ੍ਹਾ
0
0
ਤੁਹਾਡਾ ਕਾਰਟ
ਤੁਹਾਡਾ ਕਾਰਟ ਖਾਲੀ ਹੈਦੁਕਾਨ ਤੇ ਵਾਪਸ ਜਾਓ
ਚੋਟੀ ੋਲ