The Mini913D plugs into a matching cabinet board through a high-density board-to-board connector. This arrangement suits cabinets with a dedicated carrier board and limited space behind the modules.
Matching the cabinet board
Check the exact receiver suffix and carrier-board pinout before ordering. Choose the data mode for the installed modules and keep a copy of the cabinet configuration for replacement or service.
ਤਕਨੀਕੀ ਨਿਰਧਾਰਨ
| ਪੈਰਾਮੀਟਰ | ਨਿਰਧਾਰਨ |
|---|---|
| Cabinet connection | High-density BTB connector |
| ਵੱਧ ਤੋਂ ਵੱਧ ਕਾਰਡ ਲੋਡ | 512 × 512 ਪਿਕਸਲ |
| RGB output mode | 32 ਸਮੂਹ |
| Serial output mode | 64 ਸਮੂਹ |
| ਡਰਾਈਵਰ ਸਹਾਇਤਾ | ਜਨਰਲ ਅਤੇ PWM ਡਰਾਈਵਰ ICs |
| ਸੰਰਚਨਾ | File readback supported |
ਉਤਪਾਦ ਚਿੱਤਰ ਅਤੇ ਸਰੋਤ


ਅਕਸਰ ਪੁੱਛੇ ਜਾਣ ਵਾਲੇ ਸਵਾਲ
1. Can this receiver plug into a HUB75 ribbon cable?
The Mini913D uses a high-density board-to-board connection. Verify that the cabinet carrier provides the mating connector and correct signal pinout.
2. What is the maximum load on one card?
The published maximum is 512 × 512 pixels. The installed module layout must also suit the selected RGB or serial output mode.
3. Can I retrieve the cabinet settings before replacing a card?
Yes. Configuration-file readback is supported. Save the working configuration and verify it against the replacement card and modules.



