Match the card to your LED modules
The DH7516-S is a NovaStar receiving card with 16 HUB75E connectors and support for up to 32 groups of parallel RGB data. Check the module pinout and driver IC before wiring a cabinet.
The pixel limit depends on the driver IC. At 60 Hz, NovaStar specifies up to 512 × 512 pixels with PWM driver ICs and up to 512 × 384 with common driver ICs.
Cabinet setup
Use NovaLCT 5.3.0 or later to configure the cabinet. The card supports pixel-level brightness and chroma calibration, independent RGB gamma adjustment, 3D, 90° rotation and dual-card backup.
| ਬ੍ਰਾਂਡ ਅਤੇ ਮਾਡਲ | ਨੋਵਾਸਟਾਰ DH7516-S |
|---|---|
| ਉਤਪਾਦ ਦੀ ਕਿਸਮ | LED ਡਿਸਪਲੇਅ ਪ੍ਰਾਪਤ ਕਰਨ ਵਾਲਾ ਕਾਰਡ |
| ਆਉਟਪੁੱਟ | 16 × HUB75E |
| ਪੈਰਲਲ RGB ਡਾਟਾ | 32 ਸਮੂਹਾਂ ਤੱਕ |
| PWM ਡਰਾਈਵਰ ICs ਨਾਲ ਵੱਧ ਤੋਂ ਵੱਧ ਲੋਡ | 60 Hz 'ਤੇ 512 × 512 ਪਿਕਸਲ |
| ਆਮ ਡਰਾਈਵਰ ਆਈਸੀ ਦੇ ਨਾਲ ਵੱਧ ਤੋਂ ਵੱਧ ਲੋਡ | 60 Hz 'ਤੇ 512 × 384 ਪਿਕਸਲ |
| ਕੌਨਫਿਗਰੇਸ਼ਨ ਸਾੱਫਟਵੇਅਰ | NovaLCT 5.3.0 ਜਾਂ ਬਾਅਦ ਵਾਲਾ ਅਤੇ V-Can |
| ਡਿਸਪਲੇ ਫੰਕਸ਼ਨ | Pixel-level brightness and chroma calibration, independent RGB gamma, 3D and 90° rotation |
| ਰਿਡੰਡੈਂਸੀ | ਦੋਹਰਾ-ਕਾਰਡ ਬੈਕਅੱਪ |
| EMC ਪਾਲਣਾ | ਕਲਾਸ ਬੀ |


ਨਿਰਧਾਰਨ ਡਾਊਨਲੋਡ
ਆਮ ਪ੍ਰਸ਼ਨ
Which pixel limit should I use?
Use the limit for the driver IC in your modules. Use 512 × 384 at 60 Hz for common driver ICs and 512 × 512 at 60 Hz for PWM driver ICs, subject to the module and cabinet configuration.
Can I use the same module cables when replacing a card?
Compare the module connector pinout with the DH7516-S pinout in the specification before reusing cables. Save your cabinet configuration before changing cards.



