NovaStar CVT310 Ethernet-to-Fiber Converter
NovaStar CVT310 connects an LED display signal link over multimode optical fiber. It converts between electrical and optical signals, with one Gigabit Ethernet port and one duplex LC fiber port supporting a distance of up to 300 m.
Základná špecifikácia
| Modelka | NovaStar CVT310 |
|---|---|
| Ethernetové pripojenie | 1 port Gigabit Ethernet |
| Optické pripojenie | 1 multimode, twin-core LC port; factory-installed optical module |
| Optické spojenie | 850 nm; 1.25 Gb/s; up to 300 m |
| Príkon | AC 100–240 V, 50/60 Hz |
| Rated consumption | 3.5 W |
| Rozmery | × × 149 135 38 mm |
| Cista hmotnost | 0.53 kg |
Choose the Right Connection
Plan the fiber link around the sending card’s available outputs. Check its model, optical interface and the equipment at the display end before ordering. Connector shape alone does not establish compatibility.
- Sending card with an optical output: check the optical specification against the CVT310 before planning a direct fiber connection.
- Sending card without an optical output: plan conversion at both ends of the fiber run. The official specification below illustrates both connection arrangements.
- Pred kúpou: confirm the required converter quantity, cable length and included accessories for your installation.
Potrebujete pomôcť s výberom dielov? Send us your controller model and connection requirementsalebo prehliadať Produkty NovaStar pre riadenie LED.
Často kladené otázky
Which fiber cable does the CVT310 use?
Use multimode twin-core fiber with LC connectors. Confirm the complete cable and optical link specifications before installation.
Does it require a driver?
No driver installation is required. Connect the compatible signal link and power supply before use.
Where can I check the CVT310 price?
The current unit price and stock status appear at the top of this page. Check the cart and checkout for the total applicable to your order and delivery destination.
Obrázky výrobkov
Download the CVT310 Specification
NovaStar CVT310 Fiber Converter Specifications (PDF, V2.3.3)
Source: NovaStar’s model-specific specification. Review its application diagrams when planning your signal path.
