The RV905H provides module-side outputs for LED cabinets and supports brightness calibration at the pixel level. Compare the cabinet board and connector mapping when replacing an existing receiver.
Checking the hardware revision
The RV905H V1.1 specification lists a maximum of 512 × 448 pixels subject to cabinet design. Earlier storefront text gives 1024 × 256. Confirm the revision-specific load before creating a new screen map.
సాంకేతిక వివరములు
| పరామితి | స్పెసిఫికేషన్ |
|---|---|
| Module drive | Four outputs described in product information |
| V1.1 maximum layout | 512 × 448 పిక్సెల్స్, డిజైన్పై ఆధారపడి ఉంటుంది |
| విద్యుత్ కనెక్షన్ | VCC available at the module interface |
| పర్యవేక్షణ | Temperature, door and fan status |
| ఐచ్ఛిక ఉపకరణాలు | Separate humidity sensor and smoke module |
ఉత్పత్తి చిత్రాలు మరియు వనరులు
LINSN RV905H LED రిసీవర్ బోర్డ్ స్పెసిఫికేషన్
తరచుగా అడుగు ప్రశ్నలు
1. Which maximum pixel layout should I use?
Match the board revision first. The V1.1 document and earlier storefront description differ.
2. Does the receiver support module-side power?
The interfaces include VCC pins. Check the cabinet power wiring and board pinout before connection.
3. Do I need accessories for humidity or smoke monitoring?
Yes. The V1.1 specification identifies a separate humidity sensor and smoke module.






