The RV907H connects cabinet module data to the Linsn control system and supports direct module drive on its output interfaces. Check the actual pinout before selecting a mating board.
Comparing the module interface
The listing and the linked V3.0 document agree on the 24 RGB groups and maximum 1024 × 256 layout. They differ on serial group count, so confirm that figure against the installed hardware revision for a serial-data design.
సాంకేతిక వివరములు
| పరామితి | స్పెసిఫికేషన్ |
|---|---|
| సమాంతర RGB | 24 సమూహాలు |
| గరిష్ట కార్డ్ లేఅవుట్ | 1024 × 256 పిక్సెల్స్, డిజైన్పై ఆధారపడి ఉంటుంది |
| Board interface listed | Right-angle 26-pin connector |
| సర్వీస్ | కాన్ఫిగరేషన్-ఫైల్ రీడ్బ్యాక్ |
| అమరిక | Pixel correction and single-card color-space conversion |
ఉత్పత్తి చిత్రాలు మరియు వనరులు
Linsn RV907H LED స్క్రీన్ స్వీకరించే కార్డ్ స్పెసిఫికేషన్
తరచుగా అడుగు ప్రశ్నలు
1. What is the maximum layout per card?
The RV907H specification gives up to 1024 × 256 pixels, subject to the design of the modules.
2. How do I choose the correct serial configuration?
Read the board revision and verify its pinout. The storefront and V3.0 sheet give different serial group counts.
3. Can I retrieve the configuration before replacement?
Yes. Read back and save the existing receiver configuration before changing hardware.




