The SC801 converts the copper data link into an optical run for a Linsn LED control system. Choose the single-mode version to match the installed fiber and the equipment at both ends.
Matching the optical link
The shared converter sheet lists a single-mode maximum of 20 km and describes about 10 km with 9/125 µm fiber. Confirm the optics, fiber and link budget for the planned distance.
సాంకేతిక వివరములు
| పరామితి | స్పెసిఫికేషన్ |
|---|---|
| ఫైబర్ మోడ్ | సింగిల్-మోడ్ |
| ఆప్టికల్ కనెక్టర్ | SC |
| Fiber listed | 9/125 or 5/125 µm |
| ఆప్టికల్ తరంగదైర్ఘ్యం | 1310 నామ్ |
| Listed reach | up to 20 km, depending on fiber |
| AC supply in linked sheet | 110–230 వి, 50/60 హెర్ట్జ్ |
ఉత్పత్తి చిత్రాలు మరియు వనరులు



లిన్స్న్-sc801-స్పెసిఫికేషన్స్.pdf
తరచుగా అడుగు ప్రశ్నలు
1. What fiber does the SC801 use?
Use single-mode fiber and matching optics at both ends. The shared specification covers more than one converter version.
2. Which connector is on the optical side?
The specification identifies an SC optical port. Check the patch lead and installed fiber before ordering.
3. Does the other fiber mode’s reach apply?
Use the distance and wavelength for the single-mode configuration. The other mode uses different optics.










