Àkópọ̀ Àkópọ̀ NovaStar VX2000 Pro
The NovaStar VX2000 Pro is an all-in-one LED video controller that combines professional video processing and LED display control in one device. It provides 20 Gigabit Ethernet outputs, supports a loading capacity of up to 13 million pixels, and accepts video input up to 4K × 2K at 60Hz. A single controller can drive ultra-wide canvases up to 16,384 pixels or ultra-tall canvases up to 8,192 pixels.
Built for large rental screens, stage production, broadcast environments and fine-pitch LED installations, the VX2000 Pro reduces rack complexity while retaining multi-layer composition, flexible scaling, fiber connectivity, source mosaicing and backup functions. Operators can control it from the front panel, NovaLCT, the Unico web interface or the VICP mobile app.
NovaStar VX2000 Pro Key Features
- Agbara piksẹli miliọnu 13: Twenty Gigabit Ethernet outputs support demanding LED canvases with a maximum width of 16,384 pixels and maximum height of 8,192 pixels.
- Ìtẹ̀wọlé 4K tòótọ́: Asopọmọra DP 1.2 ati HDMI 2.0 ṣe atilẹyin fun awọn ipinnu titẹ sii titi di 4K × 2K ni 60Hz.
- Flexible layer resources: Use up to twelve 2K layers, six 4K × 1K layers or three 4K × 2K layers, depending on the production layout.
- Awọn ọna ṣiṣe mẹta: Configure the unit as a Video Controller, Fiber Converter or in ByPass mode.
- Four OPT ports: Optical connectivity supports long-distance signal transport, fiber input mosaicing and adaptable sending-card output workflows.
- Professional synchronization: Genlock input and loop, low latency, output synchronization and EDID management help maintain stable multi-device systems.
- Àwọn irinṣẹ́ dídára àwòrán: Scaling, color adjustment and pixel-level brightness and chroma calibration support consistent LED output.
- Sisisẹsẹhin USB: Play compatible media from a USB drive for quick testing or straightforward playback requirements.
- Resilience iṣẹ: End-to-end backup, Ethernet-port backup testing and data retention after power loss support live-event reliability.
NovaStar VX2000 Pro ni pato
| ọja iru | Olùdarí fídíò LED àti ẹ̀rọ ìṣiṣẹ́ gbogbo-nínú-ọ̀kan |
|---|---|
| Awọn abajade LED | Àwọn ibùdó Ethernet Gigabit 20 × |
| Agbara ikojọpọ ti o pọju | Awọn piksẹli miliọnu 13 |
| Fífẹ̀ kanfasi tó pọ̀ jùlọ | Awọn piksẹli 16,384 |
| Gíga àwọ̀tẹ́lẹ̀ tó pọ̀ jùlọ | Awọn piksẹli 8,192 |
| Iwọn titẹ sii ti o pọju | 4K × 2K ní 60Hz |
| Awọn igbewọle fidio | 1 × DP 1.2, 2 × HDMI 2.0, 4 × HDMI 1.3 and 1 × 12G-SDI input with loop |
| Amuṣiṣẹpọ | Genlock input and loop |
| Asopọmọra opitika | 4 × Awọn ibudo OPT fun awọn iṣan-iṣẹ okun |
| Àbójútó àti ohùn | Ifihan ibojuwo HDMI pẹlu titẹ sii ohun ominira 3.5 mm ati ifihan |
| Layer resources | Up to 12 × 2K, 6 × 4K × 1K or 3 × 4K × 2K layers |
| Awọn ipo ṣiṣẹ | Oluṣakoso fidio, Iyipada Okun ati ByPass |
| Awọn ọna iṣakoso | Front panel, NovaLCT, Unico web interface and VICP app |
| Awọn iṣẹ mojuto | Scaling, presets, HDMI and fiber input mosaic, 3D, USB playback, low latency, output synchronization, EDID management and pixel-level calibration |
Bawo ni NovaStar VX2000 Pro ṣe n ṣiṣẹ
Ipò Olùṣàkóso Fídíò
In Video Controller mode, the VX2000 Pro receives and processes live video sources before sending the mapped image to LED receiving cards through its Ethernet or optical output path. This mode enables layers, scaling, presets, source switching, color controls and calibration workflows.
Ipo Iyipada Okun
Fiber Converter mode supports long-distance optical transmission between the control position and the LED display. The four OPT ports can be integrated into adaptable fiber topologies. Confirm the required optical modules, fiber type and system direction before ordering accessories.
Ipo ByPass
ByPass mode provides a direct signal-routing workflow when independent video processing is not needed. This can simplify redundancy and system-integration designs while retaining the controller’s professional connections.
Layer Formats and Large-Canvas Production
The VX2000 Pro allocates twelve 2K layer resources. A 4K × 1K layer uses two resources, while a 4K × 2K layer uses four. Therefore, a project can build up to twelve 2K layers, six dual-width layers or three full 4K layers. This flexible allocation is useful for multi-camera stages, presentations, broadcast layouts and mixed-resolution source mosaics.
For ultra-wide screens, distribute the LED load across the 20 Ethernet outputs and verify that each output stays within the receiving-card and cabling limits. Presets should be tested and saved before a live event so operators can recall approved layouts without rebuilding the canvas.
Awọn ohun elo ti a ṣe iṣeduro
- Large concert, touring and festival LED screens
- Awọn eto ifihan LED iyalo alabọde ati giga
- Broadcast studios, control rooms and virtual production
- Corporate events, exhibitions and product launches
- Awọn odi fidio LED ti o dara julọ ati awọn kanfasi ifihan jakejado-pupọ
- Projects requiring fiber transmission, source mosaicing or system backup
Awọn akọsilẹ imuṣiṣẹ
Match the output resolution and Ethernet-port loading to the receiving-card configuration before connecting the screen. Use NovaLCT or the supported Unico workflow to map the LED canvas, verify signal timing and save tested presets. Firmware, software versions, optical modules, 3D accessories and cabling requirements may vary by project, so confirm compatibility with the complete LED control system before purchase.
Nigbagbogbo bi Ìbéèrè
Àwọn píksẹ́lì mélòó ni NovaStar VX2000 Pro lè ṣàkóso?
NovaStar VX2000 Pro le gba to awọn piksẹli miliọnu 13. Fífẹ̀ kanfasi to pọ julọ jẹ awọn piksẹli 16,384 ati giga to pọ julọ jẹ awọn piksẹli 8,192, labẹ opin ikojọpọ lapapọ ati iṣeto kaadi gbigba.
Iye awọn abajade Ethernet melo ni VX2000 Pro ni?
It has 20 Gigabit Ethernet LED outputs. These ports distribute the processed image to the LED receiving-card network.
Ǹjẹ́ NovaStar VX2000 Pro ṣe àtìlẹ́yìn fún ìtẹ̀síwájú 4K?
Yes. Its DP 1.2 and HDMI 2.0 inputs support video input up to 4K × 2K at 60Hz. Supported timings depend on the selected connector and EDID configuration.
How many layers does the VX2000 Pro support?
It provides twelve 2K layer resources. They can be allocated as up to twelve 2K layers, six 4K × 1K layers or three 4K × 2K layers.
Àwọn ipò iṣẹ́ mẹ́ta wo ni VX2000 Pro?
The modes are Video Controller, Fiber Converter and ByPass. Video Controller mode enables processing and LED output, Fiber Converter mode supports optical transport, and ByPass provides direct signal routing.
Ṣe VX2000 Pro le mu media lati awakọ USB ṣiṣẹ?
Yes. The controller supports USB playback for compatible media, providing a convenient source for testing and simple playback tasks.
How does the VX2000 Pro compare with the VX1000 Pro?
The VX2000 Pro provides 20 Ethernet outputs, 13-million-pixel capacity and twelve 2K layer resources. The NovaStar VX1000 Pro provides 10 outputs, 6.5-million-pixel capacity and six layers, making it better suited to smaller canvases.
Àwọn ìgbàsókè àti Ìtọ́kasí Olóṣèlú
A ṣe àyẹ̀wò àwọn kúlẹ̀kúlẹ̀ ìmọ̀-ẹ̀rọ pẹ̀lú NovaStar VX2000 Pro Specifications V1.0.3. Àwọn pàtó, àwọn iṣẹ́ tí a ti ṣe àtìlẹ́yìn àti àwọn ohun èlò mìíràn tí a fi kún un lè yípadà pẹ̀lú firmware tàbí àwọn àtúnṣe ìṣelọ́pọ́; jẹ́rìí sí àwọn ohun tí iṣẹ́ náà béèrè lọ́wọ́lọ́wọ́ kí o tó pàṣẹ.
