The Mini913A is a compact receiving card for cabinets built around a matching board-to-board connector. The card handles module data and supports color-space adjustment at the individual receiving card.
Matching the cabinet board
Check the exact receiver suffix and carrier-board pinout before ordering. Choose the data mode for the installed modules and keep a copy of the cabinet configuration for replacement or service.
技術規格
| 參數 | 規格 |
|---|---|
| 機櫃連接 | 高密度BTB連接器 |
| 最大卡片負載 | 512×512像素 |
| RGB output mode | 32組 |
| 串行輸出模式 | 64組 |
| 驅動程序支持 | 通用和PWM驅動IC |
| 型號 | File readback supported |
產品圖片和資源


常見問題
1. Can this receiver plug into a HUB75 ribbon cable?
The Mini913A uses a high-density board-to-board connection. Verify that the cabinet carrier provides the mating connector and correct signal pinout.
2. What is the maximum load on one card?
The published maximum is 512 × 512 pixels. The installed module layout must also suit the selected RGB or serial output mode.
3. Can I retrieve the cabinet settings before replacing a card?
Yes. Configuration-file readback is supported. Save the working configuration and verify it against the replacement card and modules.



