NovaStar JT50 Plus Overview
The NovaStar JT50 Plus is an asynchronous LED multimedia player for traffic and public information displays. It combines media playback and LED data output in one device, with a loading capacity of up to 650,000 pixels.
Designed for highways, urban roads and parking facilities, the JT50 Plus fits tollbooth information screens, traffic guidance signs and passenger information system displays. Terminal authentication and playback verification help protect published content.
主要技術指標
| 規格 | NovaStar JT50 Plus |
|---|---|
| LED負載能力 | 高達 650,000 像素 |
| 最大寬度/高度 | 2048 / 2048 pixels, subject to the 650,000-pixel capacity of the LED output port |
| 處理器 | 四核心 ARM Cortex-A53，1.4 GHz |
| 記憶體應用 | 2 GB RAM |
| 內部存儲 | GB 32 |
| 視頻解碼 | 4K硬體解碼 |
| LED輸出 | 1個千兆以太網端口 |
| 音訊 | 1 stereo output; fixed 48 kHz sampling rate |
| USB | 1 USB 2.0 Type-A and 1 USB Type-B |
| 網絡控制 | 1 100 Mbps Ethernet port, WiFi and optional 4G |
| 感測器介面 | 2個RS485端口 |
| 繼電器輸出 | Up to DC 30 V, 3 A |
Playback and Control
- USB firmware upgrade: Update device firmware with a USB flash drive through the USB 2.0 Type-A port.
- Direct computer connection: Use USB Type-B for program publishing and display control.
- Local or public network publishing: Connect the 100 Mbps control port directly to a computer, LAN or public network.
- LED and audio output: Send LED data through the Gigabit Ethernet output and stereo audio at a fixed 48 kHz sampling rate.
- Sensor support: Connect brightness, temperature, or humidity sensors through the two RS485 interfaces.
WiFi, 4G and Time Synchronization
The JT50 Plus supports WiFi AP mode and WiFi AP + Station mode. A phone or computer can connect to the player’s built-in hotspot, while AP + Station mode lets the unit connect to WiFi and provide a hotspot at the same time.
- Network priority: wired Ethernet, then WiFi, then 4G
- NTP時間同步
- GPS time synchronization with a specified 4G module
- RF time synchronization with a specified RF module
- Optional 4G connectivity; a 4G module is not included by default
- Support for mainstream transportation platform protocols
推薦應用
- Highway and urban traffic guidance LED displays
- Tollbooth information screens
- Parking guidance and message displays
- Passenger information system displays
- Other unattended LED signs that require scheduled or network-based content publishing
常見問題
What is the NovaStar JT50 Plus loading capacity?
The JT50 Plus loads up to 650,000 pixels through one Gigabit Ethernet LED output. The maximum width is 2048 pixels and the maximum height is 2048 pixels, subject to the total pixel limit.
Can the JT50 Plus play 4K video?
Yes. Its quad-core ARM Cortex-A53 processor supports 4K video hardware decoding. The player also includes 2 GB RAM and 32 GB internal storage.
Does the JT50 Plus include a 4G module?
No. The player supports a compatible 4G module, but the module is not included by default and must be purchased separately when required.
Can firmware be upgraded without a network connection?
Yes. Firmware can be upgraded from a USB flash drive through the USB 2.0 Type-A port.
What LED display projects is the JT50 Plus designed for?
It is designed for asynchronous traffic and information display projects, including traffic guidance signs, tollbooth screens, parking displays and passenger information systems.
Download the JT50 Plus Specification
Download the NovaStar JT50 Plus specification (Chinese PDF).
探索更多 LED媒體播放器 或瀏覽 NovaStar產品系列.
