NovaStar 10G SFP Single-Mode Fiber Optic Module
The NovaStar 10G SFP single-mode fiber optic module converts electrical data to an optical signal and optical input back to electrical data for NovaStar video controllers with an SFP port. It is a practical replacement or spare for LED display installations that require stable, long-distance signal transmission.
Key benefits
- LC fiber interface: Uses a standard duplex LC connection for single-mode fiber.
- Up to 10 km reach: Suitable for long cable runs between the controller and LED display system when the fiber link budget is met.
- Wide 10G rate range: Supports bit rates from 9.95 to 11.3 Gb/s.
- Hot-pluggable: Designed for convenient installation and service with compatible NovaStar SFP equipment.
Technical specifications
| Item | Specification |
|---|---|
| Fiber interface | LC connection |
| Transmission distance | Up to 10 km (single-mode fiber) |
| Supported bit rate | 9.95–11.3 Gb/s |
| Supply voltage | 3.3 V |
| Power consumption | < 1.5 W |
| Dimensions | 57 × 14 × 12.8 mm |
| Weight | 0.2 kg |
| Operating temperature | 0 to +70 °C |
| Humidity | 0–85% RH |
Compatibility and installation notes
Use this module only with NovaStar video controllers or related devices that provide an SFP connection. Confirm the controller model, firmware, fiber type, connector polarity, and optical budget before ordering. Insert the module until it is fully seated, connect the LC fiber pair, and verify link status in the controller software.
What is included?
This listing is for one NovaStar 10G SFP single-mode optic module. The original product images below show the module and connector details.
Specifications download
Download the NovaStar 10G SFP module product specifications (PDF).
Frequently asked questions
Which devices is this NovaStar SFP module compatible with?
It is intended for NovaStar devices equipped with an SFP port. Check the exact controller model and firmware before installation.
How far can the module transmit?
The stated transmission distance is up to 10 km over suitable single-mode fiber, subject to the link budget and installation quality.
Can the module be replaced while the controller is powered?
The module is hot-pluggable, but follow the controller manufacturer’s service procedure and observe normal fiber-safety practices.
