Mooncell MTB800E LED Sending Controller
The Mooncell MTB800E is an eight-output LED sending controller for HDMI 2.0 and DP 1.2 sources. Its 4K × 2K @ 60 Hz processing stage feeds an LED system with a total loading capacity of 5.2 million pixels.
Technical Specifications
| Parameter | Specification |
|---|---|
| LED outputs | 8 × Gigabit Ethernet |
| Total LED capacity | 5.2 million pixels |
| Video inputs | 1 × HDMI 2.0; 1 × DP 1.2 |
| Processing capability | 4K × 2K @ 60 Hz |
| Audio input | 1 × AUDIO |
| Communication | USB, RS232 and 100M LAN |
| Preset resolutions | 1024 × 768; 1280 × 1024; 1366 × 768; 1600 × 1200; 1920 × 1080; 2048 × 1152; 2560 × 960 |
| Custom resolution | Supported |
| Input frame-rate compatibility | 30 Hz, 50 Hz, 60 Hz and 120 Hz listed separately |
| Backup options | Ethernet loop dual backup and dual-master controller backup |
| Diagnostics | Host status monitoring, stored-configuration readback and network error-rate detection |
Planning an Eight-Port LED Display
Start with the LED wall pixel count and cabinet arrangement, then distribute the load across the eight Ethernet outputs. The source resolution, input frame rate and actual screen load are separate checks. A listed 120 Hz input frame rate does not mean 4K processing at 120 Hz.
USB, LAN and RS232 provide control connections. For maintenance, use configuration readback, status monitoring and cable error-rate detection. Loop and dual-controller backup require the corresponding system configuration.
Hardware Options to Confirm
For a project requiring fiber transmission or active 3D, verify the supplied unit and matching documentation. The legacy specification does not clearly identify a fiber output in its interface table, and it marks the 3D transmitter connector as a reserved, customized interface.
Product Image and Specification Download
Download Specification:
Mooncell MTB800E Master Controller Series Video Processor Specification
Frequently Asked Questions
How many LED pixels can the MTB800E control?
The whole-unit capacity is 5.2 million pixels. Plan the cabinet allocation across its eight Gigabit Ethernet outputs within the applicable configuration limits.
Can I connect HDMI and DisplayPort sources?
The controller provides one HDMI 2.0 input and one DP 1.2 input. Its stated 4K processing capability is 4K × 2K @ 60 Hz.
Does accepting a 4K input mean the output screen can contain every 4K pixel?
No. Source input timing and LED output capacity are different limits. The MTB800E has a stated total LED load of 5.2 million pixels, so the screen layout must be planned within that capacity.
Can I recover the configuration from an MTB800E?
Yes. Configuration readback is supported, along with host software monitoring of operating parameters and status and Gigabit network error-rate checks.
What should I confirm for fiber transmission or active 3D?
The legacy overview mentions fiber transmission, but the detailed output table specifies eight Ethernet ports without identifying a fiber connector. Its 3D transmitter interface is marked reserved and requiring customization. Confirm the hardware arrangement before ordering for these uses.
