The RV907H connects cabinet module data to the Linsn control system and supports direct module drive on its output interfaces. Check the actual pinout before selecting a mating board.
Comparing the module interface
The listing and the linked V3.0 document agree on the 24 RGB groups and maximum 1024 × 256 layout. They differ on serial group count, so confirm that figure against the installed hardware revision for a serial-data design.
បច្ចកទស
| ប៉ារ៉ាមែត្រ | ការបញ្ជាក់លម្អិត |
|---|---|
| RGB ប៉ារ៉ាឡែល | ក្រុម 24 ។ |
| ប្លង់កាតអតិបរមា | ៥១២ × ៤៤៨ ភីកសែល អាស្រ័យលើការរចនា |
| Board interface listed | Right-angle 26-pin connector |
| សេវាកម្ម | ការអានឯកសារកំណត់រចនាសម្ព័ន្ធឡើងវិញ |
| ការក្រិតតាមខ្នាត | Pixel correction and single-card color-space conversion |
រូបភាពផលិតផល និងធនធាន
Linsn ការបញ្ជាក់កាតទទួលអេក្រង់ LED RV907H
សំណួរដែលគេច្រើនសួរ
1. What is the maximum layout per card?
The RV907H specification gives up to 1024 × 256 pixels, subject to the design of the modules.
2. How do I choose the correct serial configuration?
Read the board revision and verify its pinout. The storefront and V3.0 sheet give different serial group counts.
3. Can I retrieve the configuration before replacement?
Yes. Read back and save the existing receiver configuration before changing hardware.




