NovaStar MRV532 LED Receiving Card Overview
The NovaStar MRV532 is an LED receiving card for PWM-based LED display modules. One card supports up to 512×512 pixels at 60Hz with an 8-bit video source, эсвэл 512×384 pixels at 60Hz with a 10-bit or 12-bit source. It is suited to fine-pitch, rental and fixed LED displays that require stable data transmission, accurate color and flexible image mapping.
The MRV532 uses 10 standard HUB320F connectors. It can output up to 40 groups of RGB real-pixel data, 40 groups of three-color sub-pixel data or 30 groups of four-color sub-pixel data. In a compatible NovaStar system, it also supports pixel-level calibration, seam correction, low-latency operation, 3D output and image rotation.
MRV532 Specifications at a Glance
| Үзүүлэлт | MRV532 value |
|---|---|
| Бүтээгдэхүүний төрөл | LED дэлгэц хүлээн авах карт |
| Maximum load, 8-bit source | 512×512 pixels at 60Hz |
| Maximum load, 10-bit or 12-bit source | 512×384 pixels at 60Hz |
| Модулийн холбогч | 10 стандарт HUB320F холбогч |
| оролтын хүчдэл | DC 3.8V-ээс 5.5V хүртэл |
| Эрчим хүчний хэрэглээний үнэлгээ | 2.5W |
| Хэмжээ | 146.0 × 91.5 × 19.2mm |
| цэвэр жин | 99.5g, receiving card only |
Key Features and Display Benefits
- Пикселийн түвшний тод байдал болон хромын тохируулга: Works with NovaStar’s high-precision calibration system to reduce brightness and color differences between pixels.
- Seam correction: Supports automatic or manual correction of brightness differences at module or cabinet seams when used with the NovaStar TU series.
- Dark-line and bright-line adjustment: Applies seam-related corrections quickly so the result can be checked immediately.
- Бага хоцролт: Video-source latency can be reduced to one frame when the LED module uses a driver IC with built-in RAM.
- 3D гаралт: Available when the connected controller supports 3D functions.
- Зургийн 90 градусын эргэлт: Rotates the display image to 0, 90, 180 or 270 degrees for portrait and non-standard cabinet layouts.
Тохиромжтой байдал ба програмууд
The NovaStar MRV532 receiving card is intended for NovaStar control systems and LED modules using PWM driver ICs. Typical applications include fine-pitch indoor displays, rental LED cabinets, fixed-installation video walls and cabinets that need rotated image mapping.
Compatibility depends on the LED module driver IC, HUB interface, controller model, firmware and cabinet configuration file. Confirm these items before replacing an existing receiving card. For current controller and software information, refer to NovaStar албан ёсны вэбсайт and the MRV532 specification PDF below.
NovaStar MRV532 Product Image
Нарийвчилсан техникийн үзүүлэлтүүд
| Ангилал | Барааны | Үзүүлэлт |
|---|---|---|
| Video capacity | Хамгийн их нарийвчлал | 512×512@60Hz for 8-bit video sources; 512×384@60Hz for 10-bit or 12-bit video sources |
| Мэдээллийн гаралт | RGB real-pixel data | 40 хүртэлх бүлэг |
| Мэдээллийн гаралт | Three-color sub-pixel data | 40 хүртэлх бүлэг |
| Мэдээллийн гаралт | Four-color sub-pixel data | 30 хүртэлх бүлэг |
| Interface | Модулийн холбогч | 10 стандарт HUB320F холбогч |
| Цахилгааны | оролтын хүчдэл | DC 3.8V-ээс 5.5V хүртэл |
| Цахилгааны | Одоогийн үнэлгээтэй | 0.5A |
| Цахилгааны | Эрчим хүчний хэрэглээний үнэлгээ | 2.5W |
| Үйл ажиллагааны орчин | Температур | -20 ° C хүртэл + 70 ° C |
| Үйл ажиллагааны орчин | Чийгшил | 10% RH - 90% RH, конденсацгүй |
| Хадгалалтын орчин | Температур | -25 ° C хүртэл + 125 ° C |
| Хадгалалтын орчин | Чийгшил | 0% RH - 95% RH, конденсацгүй |
| Физик | Хэмжээ | 146.0 × 91.5 × 19.2mm |
| Физик | цэвэр жин | 99.5g, receiving card only |
| Сав баглаа боодол | Individual protection | Antistatic bag and anti-collision foam |
| Сав баглаа боодол | Хайрцаг тутамд тоо хэмжээ | 100 карт |
| Сав баглаа боодол | Хайрцагны хэмжээ | 625.0 × 180.0 × 470.0mm |
Installation and Configuration Checklist
- Verify the LED module driver IC and confirm the controller supports the required bit depth and refresh rate.
- Confirm the module uses the correct HUB320F interface and pin mapping.
- Connect the receiving-card power input within the specified DC 3.8V to 5.5V range.
- Load the correct NovaStar cabinet file, then configure the scan mode, data groups and display mapping.
- Run pixel calibration and seam correction after the LED display is assembled.
- Test grayscale, rotation, low-latency and 3D functions required by the project before final commissioning.
Түгээмэл асуултууд
What is the NovaStar MRV532?
The MRV532 is a NovaStar LED receiving card that receives display data from a compatible controller and distributes it to PWM-based LED modules through 10 HUB320F connectors.
What is the maximum resolution of one MRV532 card?
One MRV532 supports up to 512×512 pixels at 60Hz with an 8-bit video source. With a 10-bit or 12-bit source, the maximum is 512×384 pixels at 60Hz.
Does the MRV532 support pixel calibration?
Yes. It supports NovaStar pixel-level brightness and chroma calibration to improve brightness consistency and color uniformity across the LED display.
Can the MRV532 rotate the image?
Yes. It supports image rotation at 0, 90, 180 and 270 degrees, subject to the connected system configuration.
Does the MRV532 support low latency and 3D output?
Yes. Latency can be reduced to one frame when the module driver IC has built-in RAM. 3D output requires a controller that supports 3D functions.
Захиалга өгөхөөсөө өмнө юу шалгах ёстой вэ?
Confirm the LED module driver IC, HUB interface and pin mapping, controller model, firmware, cabinet file, required bit depth and per-card pixel load. Contact us with these details if you need compatibility assistance.
Татаж авах:
NovaStar MRV532 LED Receiving Card Specification (PDF)
