The Colorlight H10Fix is a compact fiber optic transceiver for LED display control systems. It connects one 10Gb/s optical fiber link to ten Gigabit Ethernet ports, helping carry display data over longer runs between a compatible controller and the LED screen. Its one-sided interface layout makes cabling easier when the unit is installed inside or behind a fixed display.
H10Fix features
- One 10Gb/s optical port: the standard single-mode optical module supports transmission up to 2 km.
- Ten RJ45 ports: each port supports 1Gb/s data transmission for the LED control system.
- Bidirectional optoelectronic conversion: adaptive two-way operation for fiber and Ethernet signals.
- Simple installation: compact and lightweight housing with all connectors on the same side; no driver or software setup is required for normal connection.
- Hot swapping: supported by the H10Fix design.
Key specifications
| Item | H10Fix specification |
|---|---|
| Optical interface | 1 × 10Gb/s fiber port; standard 10G single-mode module |
| Ethernet interfaces | 10 × RJ45 Gigabit ports (1Gb/s each) |
| Standard fiber reach | Up to 2 km with the supplied optical module |
| Fiber connection | Single-mode duplex fiber; LC duplex optical module |
| Power | DC 5V input; AC 100–240V, 50/60Hz power adapter |
| Power consumption | 20 W |
| Dimensions / net weight | 263.4 × 106.8 × 27.7 mm / 0.5 kg |
Where it fits in an LED display system
Use the H10Fix where the controller and a fixed LED display need a fiber run. The unit converts the optical signal to Ethernet connections for the display control system. Check the controller, receiver configuration, optical module and fiber type for compatibility before installation. The 2 km figure refers to the standard optical module, not every possible fiber setup.
Specification and further information
Download the Colorlight H10Fix specification (PDF). See the Colorlight H10Fix manufacturer download page for the manufacturer’s document listing.
Conclusion
For a fixed LED display that needs a long fiber connection, the H10Fix combines a 10Gb/s optical interface, ten Gigabit RJ45 ports and a compact, easy-to-wire form factor. Confirm the optical and controller configuration against the specification before ordering.
