Colorlight Z6 Pro 4K LED Display Super Controller
The Colorlight Z6 Pro is an all-in-one LED display controller that combines video processing, splicing and LED sending. It is designed for high-resolution LED walls and rental productions that need flexible 4K sources, layered content and fiber output. This page covers the original Z6 Pro; specifications for the Z6 Pro-G2 may differ.
Key features
- Flexible 4K inputs: Up to four optional 4K input boards, with a maximum input resolution of 4096 × 2160 at 60 Hz per board. Board choices include HDMI/DisplayPort, four-DVI and four-SDI configurations.
- LED output capacity: Four 10G fiber ports, arranged as two main and two backup outputs. Total loading capacity reaches 8,847,360 pixels, subject to configuration; maximum canvas width is 8192 pixels and maximum height is 4096 pixels.
- Video composition: Up to 16 independently positioned and sized picture-in-picture (PIP) layers, with source switching, splicing, cropping and scaling.
- Image control: HDR10 and HLG support, low-latency processing, improved grayscale at low brightness, and hue, saturation and contrast adjustment. 3D display is optional.
- System control: USB, Ethernet/IP, RS232 and Art-Net control options for setup and integration.
Colorlight Z6 Pro specifications at a glance
| Feature | Specification |
|---|---|
| Input boards | Up to four optional 4K boards; HDMI/DP, 4 × DVI or 4 × SDI board types |
| Maximum input resolution | 4096 × 2160 at 60 Hz per 4K board |
| Fiber outputs | 4 × 10G; two main and two backup |
| LED loading capacity | Up to 8,847,360 pixels; maximum width 8192 pixels, maximum height 4096 pixels |
| Video layers | Up to 16 PIP layers |
| Image features | HDR10/HLG, low latency, source switching, splicing, cropping and scaling; optional 3D |
| Control | USB, Ethernet/IP, RS232 and Art-Net |
Where is the Z6 Pro used?
The Z6 Pro fits high-resolution LED displays and rental stages where multiple live or media sources must be placed across one LED canvas. The input boards and optional 3D accessories should be confirmed against your project configuration before ordering. For the full port layout, installation steps and operating limits, use the documents below.
Frequently asked questions
Does the Z6 Pro have four 4K inputs by default?
It supports up to four 4K input boards, but the board type and installed quantity depend on the selected configuration. Check the supplied hardware before planning signal connections.
Are all four 10G fiber ports separate main outputs?
No. The manufacturer describes two main fiber outputs and two backup outputs. Design the LED screen load around the stated total capacity and the intended backup arrangement.
Is the Z6 Pro the same as the Z6 Pro-G2?
No. They are distinct Colorlight models. Check the exact model marking and its matching manual when comparing specifications or firmware.
Product image and downloads
Manufacturer reference: Colorlight Z6 Pro User Manual V1.3.
Conclusion
Choose the Colorlight Z6 Pro when a high-resolution LED display needs configurable 4K inputs, multi-layer video processing and redundant 10G fiber output in one controller. Confirm the installed input boards, output mapping and optional 3D hardware for your project.
