DBS-HVT11OUT External Sender Box
The DBStar DBS-HVT11OUT provides LED sending functions in an external enclosure. It supports RGB display content, up to one billion colors as listed, audio transmission, and OE/PWM brightness adjustment.
Specifications
| Parameter | Specification |
|---|---|
| Power input | 100–240 V AC, 50/60 Hz |
| Digital video | DVI input; HDMI 1.3B support listed |
| Listed screen layouts | 1280 × 1024; 1024 × 1200; 2048 × 640 |
| Rotation | 0°, 90°, 180° and 270° |
| Backup | Dual-LAN hot backup |
| Communication | USB |
| Panel controls | Screen on/off and screen lock |
| Additional setup | Dual-port lateral, blank-line and inserted-line settings; software time-encryption setting |
System Parameters
The following source table includes receiving-card and optical-system figures as well as the sender load. These are configuration-dependent system values and do not establish built-in optical ports or identical limits for every receiving card. The original table labels its value area “Typical value”; additional figures are retained without assigning a new meaning.
| Type | Typical value | |
|---|---|---|
| Supported screen type | single color, dual-color,full-color, real pixel,virtual pixel. | |
| Supported LED drivers | MBI5026/MBI5030/MBI5036/ | |
| MBI5039/MBI5042/MBI5050/MBI6024/ | ||
| LPD6803/DM413/DMX512/ZQL9726 | ||
| TCD62D722/TC62D766/MBI5050/MBI6024 | ||
| Pixels by single sending card | 2048×640(dual ports) | |
| Number of receiving cards connected by cable | <100 | 256 |
| Pixels by single receiving cards | 256 x192（full color） | 512×384（full color） |
| 1024 x512（dual color） | 1280 x512（dual color） | |
| RGB data groups by single receiving card | 16-24 | 24 |
| Lines by one group RGB | 1/2/4/8/16/32 | 32 |
| Grey grades | 4096(4k) | 65536(64k) |
| Data CLK frequency | 15.62MHz | 31.25MHz |
| Refresh rate | 180Hz | >3600Hz(for example, MBI5042) |
| Brightness wastage | 15~20% | <5% |
| PWM brightness adjust degree | 256(may automatically adjust by brightness sensor) | |
| Electronic current plus brightness adjustment grade | 64/256(according to led drivers) | |
| Dot by dot revise pixels by PWM brightness | 64×64 | 256×256 |
| Pixels on open circuit and short circuit error detection | static：2048×16；1/2：1024×16； | |
| 1/4：2048×16；1/8：4096×16；1/16：8192×16 | ||
| Fiber transmission distance | Multi-mode fiber ：500meters； single-mode fiber：10KMs | |
| Other functions | Power on gradual protection, | |
| OE Polarity switch protect screen scan tubes, | ||
| led screen self-detecting | ||
| No sending card function | Sending images by 1000M network card PC | |
The legacy feature list names an “AADCP1.2” protocol without further explanation. Confirm the required source-protection protocol with the exact hardware; that spelling should not be treated as verified HDCP compatibility.
Frequently Asked Questions
Is the HVT11OUT an external sender box?
Yes. This product is supplied as an external LED sending box. The enclosure description does not specify an outdoor weatherproof rating.
What power input does it use?
It accepts 100–240 V AC at 50/60 Hz.
Does it support backup and screen rotation?
Yes. Dual-LAN hot backup and rotation at 0°, 90°, 180° and 270° are listed.
Which screen layouts are listed?
The feature list gives 1280 × 1024, 1024 × 1200 and 2048 × 640. Verify the receiving-card layout for the selected configuration.
How is the box configured?
USB communication is listed for setup. Panel controls provide OE/PWM brightness adjustment, screen on/off and screen locking; confirm the compatible DBStar software version for your unit.
Product Photos
