EagerLED EAB300HS5 5V 60A LED Power Supply
The EagerLED EAB300HS5 is a switching power supply for LED display applications that require 5.0V DC output. Its product nameplate identifies a 60A output rating and 200–240V AC input at 50/60Hz. The listed 300W output corresponds to 5.0V × 60A.
For a replacement LED screen power supply, match the electrical ratings and cabinet installation requirements before ordering. A matching wattage alone does not establish compatibility with an existing LED module or cabinet.
Key Specifications
| Parameter | Specification |
|---|---|
| Brand | EagerLED |
| Model | EAB300HS5 |
| Power supply type | Switching power supply |
| DC output voltage | 5.0V |
| Rated output current | 60A |
| Output power | 300W (5.0V × 60A) |
| AC input voltage | 200–240V AC |
| Input frequency | 50/60Hz |
| Maximum input current on nameplate | 4.0A |
| Application | LED display power supply |
Choosing a Replacement for Your LED Display
- Confirm the output voltage: the LED modules must be suitable for a 5V DC supply.
- Check the input supply: the pictured EAB300HS5 is marked 200–240V AC. Its nameplate does not specify 110V AC operation.
- Check the load: use the modules’ maximum power requirements and the applicable operating conditions to select the required power supply capacity and quantity.
- Check the physical installation: compare mounting holes, cabinet space, terminal arrangement and ventilation with the existing unit.
Need help identifying a replacement? Contact us with the existing power supply model, nameplate photo and LED module requirements. You can also browse our LED power supplies.
Installation and Handling
- Inspect the unit for shipping damage before installation and retain the packaging until inspection is complete.
- Keep ventilation openings clear and maintain the required clearance between conductive parts and surrounding metalwork.
- Only qualified personnel should connect or service the power supply. Follow the unit’s grounding requirements and installation instructions.
- Stop using the unit if its safety protection is damaged. Take care with condensation when moving equipment from a cold environment to a warm one.
- The original handling instructions specify a minimum four-minute wait after disconnecting power before maintenance. Qualified personnel must confirm safe conditions before servicing.
Frequently Asked Questions
What are the EAB300HS5 output ratings?
The product nameplate shows 5.0V DC and 60A output. This corresponds to the listed 300W power rating.
Can the EAB300HS5 operate on 110V AC?
The pictured unit is marked 200–240V AC, 50/60Hz. Do not select this version for a 110V AC installation without confirmation of a suitable input-rated model.
How many LED modules can one power supply support?
The number depends on each module’s maximum power requirement and the installation’s operating conditions. Check the module specifications and the power supply’s applicable load limits; module size or pixel pitch alone is insufficient.
Can it replace any other 300W LED power supply?
Replacement suitability depends on output voltage, current capacity, AC input, wiring, mounting dimensions and operating conditions. Confirm these details even when both supplies are rated 300W.
Does the downloadable PDF identify the same model?
The retained PDF filename refers to EAB300HS5, but its cover identifies EAA300HS5. Confirm the correct EAB300HS5 documentation before using that file for detailed installation or performance limits.
Product Photos
Download and Documentation
Download the existing power supply specification PDF
Model note: this PDF’s cover states EAA300HS5, while this product and its pictured nameplate state EAB300HS5. The electrical ratings above follow the EAB300HS5 nameplate and product listing. Ask us for matching documentation before relying on additional specifications in the PDF.
