The Mooncell M-TA20 LED sending card provides four network outputs and a listed 2.6-million-pixel capacity. Its two DVI inputs are described as primary and secondary connections for backup.
M-TA20 specifications
| Parameter | Specification |
|---|---|
| Video inputs | 2 DVI inputs for primary/secondary backup |
| Network outputs | 4 |
| Maximum card load | 2.6 million pixels |
| Maximum load per network port | 650,000 pixels |
| USB connections | PC communication and USB output for cascading |
| Resolution examples listed | 1024 × 768, 1280 × 720, 1280 × 800, 1366 × 768, 1600 × 1200, 1920 × 1080, 2048 × 1152, 2560 × 960 |
| Resolution readback | Supported |
| Image positioning | Adjustable |
| Power methods | Two methods listed; exact connections require confirmation |
Source setup and port allocation
Select the required computer timing, use the resolution-readback function where needed and position the image for the screen layout. Assign cabinet loads to the four network outputs while observing the per-port and whole-card limits.
Confirm DVI backup wiring and the appropriate power method for the actual board. The input list should not be interpreted as a multi-window processing specification.
Frequently Asked Questions
How many pixels can the M-TA20 send?
The card is listed for 2.6 million pixels in total, with up to 650,000 pixels per network output. Plan the receiving-card layout within both limits.
Are the two DVI inputs intended for two simultaneous picture windows?
The original description identifies them as primary and secondary inputs for DVI backup. It does not establish two independent simultaneous picture windows.
How many network outputs does the M-TA20 have?
Four network-port outputs are listed. Check the receiving-card connections and screen configuration for each port.
Can M-TA20 cards be cascaded over USB?
The listing describes a USB connection to the PC and a USB output for cascading the same card model and other USB devices. Confirm the supported connection arrangement before setup.
What power supply and wiring should I use?
The source states that two power methods are supported but does not identify their connectors or voltage. Confirm the exact board specification and power arrangement before installation.
Original product photos
