Mooncell MTB2000E 4K LED sending controller
The Mooncell MTB2000E combines video processing and LED signal sending, with HDMI 2.0 and DP 1.2 inputs and 20 Gigabit Ethernet outputs. It supports 4K input at 60 Hz for LED display installations where source resolution, output mode and cable allocation must be planned together.
Product specifications
| Parameter | Specification |
|---|---|
| Model | Mooncell MTB2000E |
| Video inputs | 1 × HDMI 2.0; 1 × DP 1.2 |
| Input resolution | Up to 3840 × 2160 at 60 Hz |
| Audio input | 1 × 3.5 mm audio input |
| LED outputs | 20 Gigabit Ethernet ports |
| Loading capacity by mode | Manufacturer model table: 10.40 million pixels with scaling; 8.29 million pixels in pixel-to-pixel mode |
| Maximum width / height | 8192 pixels wide or 8192 pixels high, within the applicable total pixel limit |
| Per-port capacity | Up to 650,000 pixels with an 8-bit input source |
| Control connections | USB, LAN and RS232 |
| Backup | Ethernet loop backup and dual master-controller backup |
| Power input | AC 100–240 V, 50/60 Hz |
| Rated power | 70 W |
Capacity and hardware-version notes
The manufacturer distinguishes scaling and pixel-to-pixel capacity. The downloadable PDF lists 10.40 million pixels in its basic parameters but 10.04 million in its output description. Confirm the applicable hardware and operating mode before using either figure in a project design.
For fiber transmission, HDMI loop output or active 3D, check the supplied rear panel and configuration. The PDF overview and detailed interface table differ; 3D is described as a reserved, customized interface. Do not assume these connections are fitted to every unit.
Frequently Asked Questions
What is the MTB2000E loading capacity?
The manufacturer model table distinguishes 10.40 million pixels with scaling from 8.29 million pixels in pixel-to-pixel mode. Confirm the operating mode and hardware version when planning a screen.
Does the MTB2000E accept 4K at 60 Hz?
Yes. The listed HDMI 2.0 and DP 1.2 inputs support up to 3840 × 2160 at 60 Hz. Input resolution and LED output loading capacity are separate limits.
How many LED output ports are available?
The controller has 20 Gigabit Ethernet outputs. The linked specification lists up to 650,000 pixels per port with an 8-bit source; the whole-unit limit still applies.
Are optical-fiber outputs and 3D standard on every unit?
Confirm the exact hardware before ordering for these features. The linked PDF overview mentions four optical-fiber outputs and HDMI loop output, but its output table only details Ethernet. Its 3D connector is described as reserved and requiring customization.
Can the controller recover configuration data and use backup connections?
Yes. It supports configuration readback, operating-status checks, Ethernet error-rate detection, Ethernet loop backup and dual master-controller backup.
Product image and specification download
Download Specification:
Mooncell MTB2000E Master Controller Specification
