VDWALL DS2-4 DVI Distributor
The VDWALL DS2-4 distributes DVI signals in LED display control systems. Its two independent splitter paths each take one input and provide two outputs, giving two inputs and four outputs in total.
Signal Routing and Card Installation
Use the DS2-4 when one DVI source needs to feed two downstream connections on each independent path. Signal amplification is supported, and the enclosure can accommodate four sending cards. Installation capacity does not establish which sending cards are included or compatible with a particular order; confirm the required card models and package configuration.
| Parameter | Specification |
|---|---|
| Product type | DVI distributor and sending-card enclosure |
| Inputs / outputs | 2 inputs / 4 outputs |
| Routing | 2 independent splitters; each input feeds 2 outputs |
| Maximum supported signal | 1920 × 1200 at 60 Hz |
| Connector | DVI-D |
| Signal amplification | Supported |
| Sending-card installation capacity | 4 cards |
| Listed input signal values | 75 Ω impedance; 0.5 Vpp |
Frequently Asked Questions
How does the DS2-4 split the signal?
It contains two independent 1-to-2 splitters. Each input is divided into two outputs.
Is the DS2-4 a two-input, four-output matrix switcher?
The listed function is two independent splitters. Arbitrary matrix routing between every input and output is not specified.
What resolution does the DS2-4 support?
The listed maximum is 1920 × 1200 at 60 Hz.
Are four sending cards included?
The product description states that four cards can be installed. Confirm card inclusion and the intended card models before ordering.
Where is the DS2-4 manual?
The original DS2-4 user-manual PDF is retained in the download section below.
Product Media and Downloads
