VDWALL LVP100M LED Video Processor
The VDWALL LVP100M is an HD video processor for LED video wall systems. It provides source selection, image sizing and dual-picture composition, helping operators arrange two sources on one display and recall saved layouts.
Video Processing and Layout Control
- Pa and Pb pictures support PIP, POP, tiled and overlapping layouts, with adjustable size and position within the selected output format.
- Input signals and stored display scenes support seamless switching.
- 16 scene presets simplify repeated layout changes.
- A front-panel knob supports setup; USB-to-RS232 communication provides host-computer control through an open protocol.
| Parameter | Specification |
|---|---|
| Model | VDWALL LVP100M |
| Video inputs | 3 × HDMI and 1 × DVI, as listed in both linked PDFs |
| Input formats | Up to 1920 × 1080 at 60 Hz |
| Video output | 1 × DVI, as listed in both linked PDFs |
| Audio output | Stereo audio; 3.5 mm connector |
| Output format examples | 3296 × 644 at 60 Hz; 1920 × 1080 at 60 Hz; 1080 × 1780 at 60 Hz |
| Picture layouts | Pa/Pb dual picture; PIP/POP |
| Display scenes | 16 presets |
| Control | Front-panel knob; USB-to-RS232 |
| Supply | 100–240 VAC, 50/60 Hz |
| Maximum power consumption | 11 W |
| Dimensions | 482.6 × 200 × 44 mm (L × W × H) |
Configuration note: The previous listing described 4 RJ45 outputs and a 2.03-million-pixel LED load. The linked PDFs describe DVI output, and the user manual separately states a 2.65-million-pixel driving capability with an optional LED sender. These descriptions do not establish the installed sending-card configuration of the supplied unit. Confirm the rear-panel connections and sending hardware before ordering; do not treat these figures as interchangeable.
Choosing an Output Format
Match the selected output format to the screen layout and the connected LED sending system. The maximum width of 3296 pixels and maximum height of 1780 lines refer to different output formats, not a combined 3296 × 1780 canvas. The download documents list the available formats.
Frequently Asked Questions
Does the LVP100M accept HDMI and DVI sources?
Both linked PDFs list three HDMI inputs and one DVI input, with input formats up to 1920 × 1080 at 60 Hz.
Can I display two pictures at once?
Yes. Pa and Pb can be arranged as PIP, POP, tiled or overlapping pictures, with their size and position adjusted within the output format.
Can it output 3296 × 1780 pixels?
The documents specify 3296 pixels as a maximum width and 1780 lines as a maximum height in separate formats. They do not specify a combined 3296 × 1780 output.
Are four LED Ethernet outputs included?
The old listing and linked documentation describe different output arrangements. Confirm the actual sending-card configuration and rear-panel ports for the unit before purchase.
Where can I download the LVP100M manual and wiring information?
The original product introduction and user manual are linked below, alongside the wiring diagram and product photographs.
VDWALL LVP100M LED HD Processor Wiring diagram：
VDWALL LVP100M LED HD Processor Product pictures：
Download Specification：
