Sysolution D60-12A LED Receiving Card Overview
The Sysolution D60-12A is an LED display receiving card with 12 standard HUB75E interfaces. It supports up to 24 groups of parallel RGB data and a maximum load of 512 × 256 pixels. It is intended for LED cabinet applications including rental screens, broadcast displays and event installations.
When selecting a replacement receiving card, check the full D60-12A model designation, module connections and cabinet configuration. A matching connector alone does not establish compatibility with an existing display system.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | D60-12A |
| Module interfaces | 12 × HUB75E |
| Parallel RGB data | Up to 24 groups |
| Maximum load | 512 × 256 pixels |
| Brightness correction load | 512 × 256 pixels |
| Chromaticity correction load | 256 × 320 pixels |
| Input voltage | DC 3.5–5.5 V |
| Rated current | 0.6 A |
| Rated power | 3 W |
| Operating temperature | −20°C to 70°C |
| Operating humidity | 10% RH–90% RH |
| Board size | 144.02 × 91.19 mm (product listing); the specification parameter table lists 144.02 × 91.2 mm. |
Configuration and Installation
LedSet 4.0 supports configuration readback, cabinet mapping and network diagnostics for this card. Use the exact-model specification below to check connections before installation. For replacement work, retain a copy of the existing cabinet configuration and confirm the module driver IC and scan settings.
The card supports brightness and chromaticity correction with the appropriate software. These modes have different loading limits, as shown in the table. Check the required correction mode when planning cabinet resolution.
Product Images
Download Specification
Sysolution D60-12A Receiving Card Specification (PDF)
Frequently Asked Questions
How many HUB75E ports does the D60-12A have?
It has 12 standard HUB75E interfaces and supports up to 24 groups of parallel RGB data.
What is the maximum pixel load of the D60-12A?
The maximum load is 512 × 256 pixels. The specification also lists 512 × 256 pixels for brightness correction and 256 × 320 pixels for chromaticity correction.
What power supply does the D60-12A require?
The specified input range is DC 3.5–5.5 V, with a rated current of 0.6 A and rated power of 3 W. Check voltage and polarity before connecting the card.
Which software is used to configure the D60-12A?
The specification describes LedSet 4.0 for cabinet configuration, parameter readback and network diagnostics.
Can I replace another receiving card with a D60-12A?
Confirm the sending controller, module pinout, driver IC, scan mode and cabinet configuration first. Do not assume that a card with the same number of HUB75E ports is a direct replacement.
