Sysolution D60-12 FPGA Receiving Card
The D60-12 is an LED receiving card with 12 HUB75E outputs and 24 groups of RGB parallel data. Choose the load configuration to match the LED module driver and calibration mode, rather than using the largest listed value for every cabinet.
Technical Specifications
| Parameter | Specification |
|---|---|
| Outputs | 12 × HUB75E; 24 RGB parallel groups |
| Conventional driver load | 512 × 320 pixels |
| PWM driver load | 512 × 384 pixels |
| Brightness correction load | 512 × 256 pixels |
| Chromaticity correction load | 256 × 320 pixels |
| Scan range | 1–64 |
| Input voltage | DC 3.5–5.5 V |
| Rated current / power | 0.6 A / 3 W |
| Operating temperature | −20°C to +70°C |
| Operating humidity | 10%–90% RH |
| Board size | 144.02 × 91.19 mm |
| Net weight | 100.8 g |
Cabinet Configuration
Verify the module pin assignment, driver chip and scan setting before replacement. Save the working cabinet configuration before changing hardware, then check the full cabinet image after installation.
Frequently Asked Questions
How many HUB75E ports does the D60-12 have?
It has 12 HUB75E ports and supports up to 24 RGB parallel data groups.
What is the maximum D60-12 pixel load?
The datasheet lists 512 × 384 for PWM drivers and 512 × 320 for conventional drivers. Correction modes have separate limits in the table above.
Does it support brightness and color correction?
Yes. The specified correction loads are 512 × 256 for brightness and 256 × 320 for chromaticity.
Which supply voltage does it require?
The specified input range is DC 3.5–5.5 V. Check polarity and wiring before applying power.
Is D60-12 the same model as D60-12A?
They have different model designations. Use the D60-12 specification for this product and confirm compatibility before substituting another card.
Original Load Chart and Product Images
