The RV907H connects cabinet module data to the Linsn control system and supports direct module drive on its output interfaces. Check the actual pinout before selecting a mating board.
Comparing the module interface
The listing and the linked V3.0 document agree on the 24 RGB groups and maximum 1024 × 256 layout. They differ on serial group count, so confirm that figure against the installed hardware revision for a serial-data design.
Technical specifications
| Parameter | Specification |
|---|---|
| Parallel RGB | 24 groups |
| Maximum card layout | 1024 × 256 pixels, design dependent |
| Board interface listed | Right-angle 26-pin connector |
| Service | Configuration-file readback |
| Calibration | Pixel correction and single-card color-space conversion |
Product images and resources
Linsn RV907H LED Screen receiving card Specification
Frequently asked questions
1. What is the maximum layout per card?
The RV907H specification gives up to 1024 × 256 pixels, subject to the design of the modules.
2. How do I choose the correct serial configuration?
Read the board revision and verify its pinout. The storefront and V3.0 sheet give different serial group counts.
3. Can I retrieve the configuration before replacement?
Yes. Read back and save the existing receiver configuration before changing hardware.




