NovaStar MRV208-1 LED Receiving Card
The NovaStar MRV208-1 is an LED display receiving card for cabinet-level data delivery. It works with NovaLCT and NovaCLB to support pixel-level brightness and chroma calibration, cabinet mapping, monitoring, and diagnostics. The model is discontinued; see the MRV208-N replacement for current projects.
Key Features
- Pixel-level calibration: Adjust brightness and chroma for each LED to improve display uniformity.
- Dark and bright line correction: Tune seams between modules or cabinets with changes applied immediately.
- 3D output support: Works with a compatible NovaStar sending card for 3D LED content.
- Fast coefficient upload: Upload calibration data quickly to reduce commissioning time.
- Cabinet mapping: Display receiving-card numbers and Ethernet-port topology for faster installation and service.
- Preset fallback image: Show a custom image at startup, with no video signal, or after Ethernet disconnection.
- Built-in monitoring: Check receiving-card temperature, voltage, runtime, and Ethernet bit errors without external peripherals.
- Readback and backup: Read back firmware and configuration parameters and save them to a local computer.
Typical Applications
Use the MRV208-1 as a service or replacement part in NovaStar-based indoor and outdoor LED display cabinets where the existing controller, scan configuration, and receiving-card wiring are compatible.
Compatibility Checklist
- Confirm the sending-card model and NovaLCT/NovaCLB workflow.
- Match cabinet scan mode, module interface, and data-group settings before replacement.
- Back up the current receiving-card configuration and calibration coefficients before servicing.
Product Status and Replacement
Status: Discontinued. For a current equivalent, review the NovaStar MRV208-N LED display receiving card. Contact us to verify configuration before ordering a replacement.
