EagerLED Outdoor LED Screen Signal Cable Socket 90°
$2.85EagerLED Outdoor LED Screen Signal Cable Socket 90°
EagerLED Q-01 LED Display Vacuum Front Maintenance Tool
$195.00The EagerLED Q-01 is a portable LED display vacuum front maintenance tool for removing compatible magnet-mounted indoor LED modules from the front of the screen.
- Adjustable vacuum valve with main switch and touch start/stop control.
- 200 × 150 mm suction cup; tool dimensions: 200 × 150 × 150 mm.
- 42 Wh lithium battery energy; specified charging: 25.2 V, 1 A.
Confirm suitability for your module before ordering. To request a particular color, please contact us.
EagerLED X-01 LED Vacuum Front Maintenance Tool
$99.00The EagerLED X-01 is an LED vacuum front maintenance tool for front-access module removal. It combines an ergonomic design, a protected switch and an anti-static design.
- 43.2Wh lithium battery; charger input: 100–240V.
- Listed continuous discharge duration: 12 minutes under laboratory conditions; actual duration varies.
- Check suitability for your LED module and cabinet before ordering.
HUB08 LED Screen HUB Card – 16-Pin Interface
$8.00HUB08 LED screen HUB card (SKU: HUB-08) with a 16-pin interface definition covering GND, A–D, OE, RD1/GD1, RD2/GD2, LAT and CLK. Compare the pinout and board layout with your existing hardware before ordering.
HUB08A LED Screen HUB Card – 16-Pin Interface
$8.00The HUB08A LED screen HUB card (SKU: HUB-08A) has a documented 16-pin interface with A–D, RD1/GD1, RD2/GD2, OE, LAT, CLK and GND assignments. Check the pinout and connector orientation against your existing board and LED module before ordering.
HUB12A LED HUB Card with 16-Pin Interface
$8.00The HUB12A LED HUB card has a 16-pin interface with OE, A/B/C/D, CLK, LAT, RD, GD and GND signal assignments. Review the full pinout and product photos below, then confirm controller, module and cable compatibility before ordering.
Shopping Cart