HUB08A LED Screen HUB Card Overview
The HUB08A LED screen HUB card, listed as SKU HUB-08A, is an LED display HUB board with the 16-pin interface definition shown below. Use the pinout and the product photos to compare this card with the board in your display before selecting a replacement.
HUB08A 16-Pin Interface Definition
The table lists each pin number and its signal label. It is a pin assignment reference, not a connector-view drawing; confirm the pin-1 position and viewing direction on the actual hardware before connecting a ribbon cable.
| Odd-numbered pin | Signal | Even-numbered pin | Signal |
|---|---|---|---|
| 1 | GND | 2 | A |
| 3 | GND | 4 | B |
| 5 | GND | 6 | C |
| 7 | OE | 8 | D |
| 9 | RD1 | 10 | GD1 |
| 11 | RD2 | 12 | GD2 |
| 13 | GND | 14 | LAT |
| 15 | GND | 16 | CLK |
Compatibility Checks Before Ordering
- Board identification: check the HUB08A model marking and compare the connector layout with the product photos.
- Signal mapping: compare all 16 pin assignments with your LED module and control-system documentation. A matching connector shape alone does not confirm compatibility.
- Cable orientation: verify pin 1, connector keying and cable direction on both connected boards.
- System requirements: confirm the receiving-card model, module interface and required electrical specifications before installation. This pinout alone does not establish a supported voltage, scan mode or pixel capacity.
For help checking a replacement, contact us with the existing board model, clear photos of both sides, the receiving-card model and the LED module interface details. You can also browse our LED HUB cards.
HUB08A Frequently Asked Questions
Which pins are marked GND on the HUB08A?
Pins 1, 3, 5, 13 and 15 are marked GND. The complete table above also identifies the A, B, C, D, OE, RD1, GD1, RD2, GD2, LAT and CLK assignments.
Are HUB08 and HUB08A interchangeable?
Do not assume interchangeability from the similar names. This page covers HUB08A; HUB08 is listed separately. Compare the exact pinout, connector orientation and system requirements before choosing either card.
Does a 16-pin connector confirm that the card will fit my LED display?
No. Check the signal assigned to every pin as well as the physical connector, cable orientation and requirements of your receiving card and LED module. If these details are unclear, request a compatibility check before ordering.



