EagerLED Q-01 LED Display Vacuum Front Maintenance Tool

$195.00

The EagerLED Q-01 is a portable LED display vacuum front maintenance tool for removing compatible magnet-mounted indoor LED modules from the front of the screen.

  • Adjustable vacuum valve with main switch and touch start/stop control.
  • 200 × 150 mm suction cup; tool dimensions: 200 × 150 × 150 mm.
  • 42 Wh lithium battery energy; specified charging: 25.2 V, 1 A.

Confirm suitability for your module before ordering. To request a particular color, please contact us.

SKU: EagerLED Q-01 Category: Brand:

Availability: 2308 in stock

EagerLED Q-01 vacuum tool for front-service LED modules

The EagerLED Q-01 LED display front maintenance tool, also called the LED Magic Tool, uses vacuum suction to remove compatible magnet-mounted indoor LED modules. It draws air out to create negative pressure, allowing the pressure difference to hold the module during removal from the front of the display.

This portable LED screen vacuum tool has an adjustable vacuum valve, a main power switch and a touch switch for start/stop control. Check your module’s mounting method and surface suitability before choosing a maintenance tool.

Q-01 specifications

EagerLED Q-01 product specifications
ItemSpecification
Brand / modelEagerLED Q-01
Maintenance methodVacuum suction for front removal of compatible magnet-mounted modules
Intended applicationIndoor LED display module maintenance; confirm suitability for the specific module
Tool dimensions200 × 150 × 150 mm
Suction cup size200 × 150 mm
Listed battery capacity12,000 mAh
Lithium battery energy42 Wh, as stated in the supplied manual
Specified charging25.2 V, 1 A
ControlsAdjustable vacuum valve, main switch and touch start/stop switch

Battery specification note: 12,000 mAh is the capacity stated in the product listing. The linked manual specifies 42 Wh as lithium battery energy; this is an energy rating, not a power rating in watts. Confirm the battery label and charger specification for the supplied unit before use.

Compatibility: check before ordering

The Q-01 is intended for indoor modules designed for front removal and held in place by magnets. Suitability depends on the module surface, size and fixing method. Pixel pitch alone does not confirm compatibility. For outdoor, flexible, COB or GOB modules, ask for confirmation for your exact module before ordering.

Contact us with your module model and photos for selection assistance or a color request. You can also browse our LED front maintenance tools.

How to use the Q-01 front maintenance tool

  1. Adjust the vacuum valve to suit the module model, following the supplied instructions.
  2. Turn on the main switch.
  3. Use the touch switch to start and stop suction during the module removal procedure.
  4. Turn off the main switch before storage.

The original operating guidance states that the indicator turns red when the battery is below 25%. Recharge promptly and avoid prolonged storage with a low battery. Follow the supplied manual and the LED module manufacturer’s service procedure.

Front maintenance demonstration video

Frequently asked questions

How does the Q-01 remove an LED module?

It uses vacuum suction to create a pressure difference that holds a compatible magnet-mounted module for removal from the front of the screen.

Will it work with every indoor LED module?

Compatibility must be checked for the specific module. Confirm the mounting method, module dimensions and surface suitability; do not rely on pixel pitch alone.

What is the suction cup size?

The listed suction cup size is 200 × 150 mm. The tool dimensions are 200 × 150 × 150 mm.

What charger specification is listed?

The specified charging values are 25.2 V and 1 A. Check the supplied unit’s label and manual before connecting a charger.

Product photos

EagerLED Q-01 LED display front maintenance tool magic tool

EagerLED Q-01 LED display front maintenance tool magic tool

EagerLED Q-01 LED display front maintenance tool magic tool

EagerLED Q-01 LED display front maintenance tool magic tool

Download the instruction manual

EagerLED Q-01 LED Magic Tool instruction manual and specifications (PDF)

Will I be charged with customs and taxes?

The prices displayed on our site are tax-free in US Dollars, which means you may be liable to pay for duties and taxes once you receive your order. Import taxes, duties and related customs fees may be charged once your order arrives to its final destination, which are determined by your local customs office. Payment of these charges and taxes are your responsibility and will not be covered by us. We are not responsible for delays caused by the customs department in your country. For further details of charges, please contact your local customs office.

Weight4.5 kg
Shopping Cart
0
0
Your Cart
Your cart is emptyReturn to Shop
New LED Display Vacuum Front Maintenance ToolEagerLED Q-01 LED Display Vacuum Front Maintenance Tool
$195.00

Availability: 2308 in stock

Scroll to Top