JPS300P-A5.0V power supply for full-color LED screens
The G-Energy JPS300P-A5.0V is a constant-voltage LED screen power supply with a listed 5V output, a 0–60A current range and 300W maximum output power. The table below retains the electrical and environmental values from this product listing.
Listed technical specifications
| Parameter | Specification |
|---|---|
| Model | JPS300P-A5.0V |
| Output type | Constant voltage |
| Maximum output power | 300W Max |
| Output voltage | 5V |
| Output current | 0–60A |
| Input voltage and frequency | 100–240VAC, 47–63Hz |
| Ripple and noise | ≤200mV |
| Efficiency | ≥88% |
| Power factor | 0.95 at 230Vac |
| Leakage current | <1mA (VIN: 230, as listed) |
| Working temperature | −30°C to 50°C |
| Storage temperature | −40°C to 80°C |
| Cooling method | Self-cooling |
| Dimensions (L × W × H) | 213 × 85 × 30; unit not stated in the original listing |
| Insulation voltage | I/P–O/P: 3.0KVac; I/P–FG: 1.5KVAC; O/P–FG: 0.5KVAC |
| Listed safety standards | GB4943, EN60950 |
| Protection functions | Input undervoltage, overload protection and short circuit protection |
Specification version note: The retained PDF includes entries that differ from this listing, including input frequency, temperature limits and ripple/noise. Verify the supplied hardware revision before using those values for an installation or replacement.
Replacement checks
Confirm the complete model marking, output requirements, input supply, terminal layout and mechanical fit. Contact us with the unit label and required operating conditions if you need revision or replacement identification.
Original photos and specification PDF
G-Energy JPS300P-A5.0V Specification
Frequently Asked Questions
What output is listed for the JPS300P-A5.0V?
The listing gives a 5V output, 0–60A output current and 300W maximum output power.
What input voltage and frequency are listed?
The product page lists 100–240VAC at 47–63Hz. Because the retained PDF contains a different frequency entry, confirm the supplied unit’s label and revision before installation.
Is 0.95 the efficiency of this supply?
No. The listing identifies 0.95 at 230Vac as power factor. Efficiency is separately listed as ≥88%.
What should I check if the PDF differs from this table?
Use the supplied unit’s exact revision and corresponding specification. The PDF and listing have differences in frequency, temperature limits and ripple/noise; contact us to clarify the applicable values before making a replacement decision.
Where can I see the product photos and download the PDF?
The three original product photos and the specification PDF link are above. Use the full JPS300P-A5.0V model marking when checking the document against your unit.
