LaitePower L300V5.0A2 LED Screen Power Supply
The L300V5.0A2 is a 300W power module with a single +5.0V DC output for LED screens. It is intended for installations within its 200–264Vac input range. Use the full A2 model designation when matching an existing unit.
Product Specifications
| Parameter | Specification |
|---|---|
| Output power | 300W |
| Rated output voltage | +5.0V DC |
| Output channel | CON2 (+)(−) |
| Voltage accuracy | ±2% |
| Output current | 0–60A at 200–240Vac input |
| Input voltage range | 200Vac to 264Vac |
| Rated input voltage | 200Vac to 240Vac |
| Input frequency range | 47Hz to 63Hz |
| Rated input frequency | 50Hz to 60Hz |
| Input current | Max. 3.5A at 230Vac, full load |
| Inrush current | ≤120A (typical peak) at 230Vac |
| Power factor | >0.58 at 230Vac |
| Efficiency | >87.0% at 230Vac, 100% load |
| Operating temperature | -25°C to +70°C |
| Protection functions | Short-circuit (SCP); overcurrent (OCP) |
| PCB treatment | Conformal coating |
Replacement and Load Checks
Compare the input supply, LED module voltage, required current and connector layout before ordering. Review the installation drawing for cabinet fit and the derating curves for the intended operating conditions. Conformal coating does not by itself establish a waterproof or outdoor enclosure rating.
The original feature text used the unclear abbreviation “ESP”. The linked manufacturer PDF identifies SCP and OCP; the protection names above follow that document.
Product Photos
Download Specification
LaitePower L300V5.0A2 Specification
Frequently Asked Questions
Can the L300V5.0A2 run on 110V AC?
110V is outside its specified 200–264Vac input range. Select a power supply with an input rating that matches the installation.
What output voltage and current does it provide?
The specification lists +5.0V DC with a 0–60A output range at 200–240Vac input. The stated output power is 300W.
Is the A2 model automatically interchangeable with L300V5.0A1?
Do not assume interchangeability from the model prefix. Compare the applicable ratings, mounting points and terminals of both units before replacing one with the other.
Does the conformal coating make it waterproof?
The product information states that the PCB is conformal-coated, but does not establish a waterproof enclosure rating. Confirm enclosure protection for the planned location.
Where can I find the L300V5.0A2 specification?
Use the original PDF link above for the electrical data, derating curves and installation drawing. Match its model and revision to the unit being installed.
