The NovaStar DH436 is a fine-pitch LED receiving card with a maximum load of 512 × 256 pixels per card, 24 groups of parallel RGB data and six onboard HUB320 (26-pin) interfaces. It combines display adjustment, monitoring and backup tools in a compact receiving-card design for dependable LED cabinet installation and maintenance.
NovaStar DH436 Overview
The DH436 receives display data from the LED control system and distributes it to the LED modules inside a cabinet. Its hardware and software are designed to simplify deployment, daily operation and maintenance. For more compatible control-system components, browse our NovaStar products and LED receiving cards.
DH436 Key Specifications
| Product type | Fine-pitch LED receiving card |
|---|---|
| Maximum loading capacity | 512 × 256 pixels per card |
| Parallel RGB data | 24 groups |
| Onboard interfaces | 6 × HUB320 (26-pin) |
| Monitoring | Temperature, voltage and error monitoring |
| Certification | RoHS |
Display Processing and Adjustment
- Brightness and chromaticity correction: helps maintain consistent color and brightness across LED modules.
- Fast bright- and dark-line adjustment: supports quick correction of visible seams between cabinets or modules.
- Independent RGB gamma adjustment: provides separate gamma control for red, green and blue channels.
- 3D support: enables use in compatible 3D LED display systems.
- Mapping: helps installers identify the physical position of receiving cards during setup and service.
Operation, Monitoring and Reliability
- Pre-stored screen settings on the receiving card
- Temperature and voltage monitoring
- LED cabinet LCD display support
- Error monitoring for faster troubleshooting
- Firmware and configuration-parameter readback
- Loop backup, dual configuration backup and dual firmware-program backup
These functions help technicians configure cabinets efficiently, check operating status and reduce recovery time when servicing a fine-pitch LED screen.
Who Is the NovaStar DH436 For?
Choose the DH436 when an LED cabinet design requires a NovaStar receiving card with six HUB320 connectors, up to 24 RGB data groups and a per-card capacity of 512 × 256 pixels. Before ordering, confirm the module connector pinout, scan configuration, cabinet wiring and total pixel load against your project design.
NovaStar DH436 FAQ
What is the maximum load of one DH436 card?
One NovaStar DH436 receiving card supports up to 512 × 256 pixels. The final supported cabinet layout also depends on the LED module scan and wiring configuration.
How many HUB interfaces are onboard?
The DH436 has six onboard HUB320 interfaces. Each interface uses a 26-pin connector.
Does the DH436 support monitoring and backup?
Yes. It supports temperature, voltage and error monitoring, plus configuration readback, loop backup, dual configuration backup and dual firmware-program backup.
Is the DH436 intended for fine-pitch LED displays?
Yes. The DH436 is a receiving card designed for small-spacing, also called fine-pitch, LED display applications.
NovaStar DH436 Product Images
