NovaStar MRV200-1 LED Receiver Card Overview
The NovaStar MRV200-1 is a compact MRV200-series LED receiving card for LED curtains and die-cast aluminum cabinets. It supports a single-card resolution of 256 × 226 pixels. The MRV200-1 is the standard version with a male connector on top.
Key Specifications
| Model | NovaStar MRV200-1 |
|---|---|
| Output modes | 16 RGBR groups, 20 RGB groups or 64 serial data groups |
| Output interfaces | Three 26-pin interfaces; pin assignments depend on the data mode |
| Supply voltage | 3.3–5.5 V; typical 5.0 V |
| Operating temperature | -20 to +70 °C |
Calibration and Monitoring
Features include pixel-by-pixel brightness and chromaticity calibration, configuration file readback, preset picture storage, temperature monitoring, Ethernet communication status detection and supply-voltage detection.
Choose the Correct MRV200 Version
| Version | Connector |
|---|---|
| MRV200-1 | Male, top |
| MRV200-2 | Male, bottom |
| MRV200-3 | Female, top |
| MRV200-4 | Female, bottom |
Select the required version in the product options before adding it to your cart. Compare the connector position and type with your existing board; the MRV200 family name alone is not enough to identify the replacement you need.
Before Ordering a Replacement Card
- Check the complete model marking and photograph both sides of the installed card.
- Compare the cabinet wiring, HUB board pinout and mounting arrangement with the specifications PDF.
- Keep a backup of your screen configuration and confirm the required data mode before replacing hardware.
- If the original board differs from the product photos, contact us with the model and connector details before ordering.
Frequently Asked Questions
Is a receiving card the same as a sending controller?
No. This product is a receiving card used within an LED display control system. Check your existing sending controller and cabinet configuration when choosing a replacement.
Can I replace any NovaStar receiver card with an MRV200-1?
Do not assume interchangeability from the brand name. Confirm the exact board version, connections and screen configuration first. Browse our LED receiving cards if you need a different model.
Where can I find the MRV200 pinout?
The NovaStar MRV200 specifications PDF below includes interface definitions and the model list. Technical values above are based on revision 2.1.1.
Product Image
MRV200 Specifications PDF
Download NovaStar MRV200 receiving card specifications (PDF)
