NovaStar NS060-30A Outdoor Light Sensor
The NovaStar NS060-30A is a waterproof ambient light sensor designed for automatic brightness control of outdoor LED displays and digital signs. Its integrated 30 m cable makes it suitable for installations where the sensor must be positioned away from the LED controller or display cabinet.
What does the NS060-30A do?
The sensor monitors surrounding light levels and sends brightness data to a compatible NovaStar control device. The LED display can then increase brightness in daylight and reduce it at night. This helps keep content readable while avoiding unnecessary power use and excessive nighttime brightness.
Key features
- Outdoor-ready housing: waterproof construction for permanent outdoor LED display installations.
- 30 m connection cable: allows flexible sensor placement with an unobstructed view of ambient light.
- Automatic brightness adjustment: enables day-to-night brightness control when configured in the NovaStar system.
- No separate power adapter required: connects to and operates through a compatible NovaStar control device.
- LED display applications: suitable for outdoor advertising screens, LED signs, stadium displays and fixed digital billboards.
Compatibility
The NovaStar NS060-30A works with compatible NovaStar devices that support light-sensor input, including the NovaStar MFN300 multifunction card and NovaStar MFN300-B multifunction box. Depending on the LED control-system configuration, it may also be used with supported NovaStar sending controllers and Taurus multimedia players. Confirm the sensor-port compatibility of your controller before ordering.
How to install and use it
- Mount the sensor outdoors where it can measure natural ambient light without being shaded by the LED screen or nearby structures.
- Route the 30 m cable safely to the compatible NovaStar controller or multifunction device.
- Connect the sensor to the supported light-sensor port.
- Configure automatic brightness rules in the applicable NovaStar control software.
- Test the brightness response at different light levels before completing the installation.
For software setup guidance, see our LED sign automatic brightness adjustment tutorial.
Product details
| Model | NovaStar NS060-30A |
|---|---|
| Product type | Ambient brightness / light sensor |
| Cable length | 30 metres |
| Installation | Indoor or outdoor; designed for outdoor exposure |
| Primary function | Automatic LED display brightness adjustment |
| External power supply | Not required when connected to a supported NovaStar device |
NovaStar NS060-30A images
Frequently asked questions
Is the NovaStar NS060-30A waterproof?
Yes. The sensor is designed for outdoor applications. Install the connector and cable route according to the controller manufacturer’s guidance to protect the complete system.
What is the cable length?
The NS060-30A version includes a 30 m cable. This distinguishes it from shorter NS060 cable variants.
Can it automatically adjust LED screen brightness?
Yes. When connected to a compatible NovaStar device and configured in the control software, it measures ambient brightness so the LED screen can adjust brightness automatically.
Does it need a separate power supply?
No separate external power adapter is required when the sensor is connected to a supported NovaStar controller or multifunction device.
Where should the sensor be mounted?
Mount it where it receives representative ambient light, away from direct illumination from the LED screen, floodlights, deep shade or obstructions that could distort the reading.
