NovaStar VX2000 Pro All-in-One LED Video Controller

The NovaStar VX2000 Pro drives up to 13 million LED pixels over 20 Gigabit Ethernet ports. Source options include 12G-SDI, DisplayPort 1.2 and HDMI.

Ask about ports, rack layout and pricing.

Map a large wall across 20 outputs

The NovaStar VX2000 Pro sends up to 13 million pixels over 20 Gigabit Ethernet ports. A screen can be up to 16,384 pixels wide or 8,192 pixels high, within the 13-million-pixel limit. Plan the cabinet load and cable route for each output before you choose a rack layout.

Use 12G-SDI if your source is an SDI production system. The unit also accepts DisplayPort 1.2 and HDMI. For long runs or backup paths, check how the four optical ports are assigned in the mode you plan to use.

Signal and screen limits

  • 13-million-pixel capacity: Twenty Gigabit Ethernet outputs carry up to 13 million pixels. The separate width and height limits are 16,384 and 8,192 pixels.
  • 4K source input: DP 1.2 and HDMI 2.0 connectivity supports input resolutions up to 4K × 2K at 60Hz.
  • Flexible layer resources: Use up to twelve 2K layers, six 4K × 1K layers or three 4K × 2K layers, depending on the production layout.
  • Three working modes: Configure the unit as a Video Controller, Fiber Converter or in ByPass mode.
  • Four OPT ports: Optical connectivity supports long-distance signal transport, fiber input mosaicing and adaptable sending-card output workflows.
  • Professional synchronization: Genlock input and loop, low latency, output synchronization and EDID management help maintain stable multi-device systems.
  • Image-quality tools: Scaling, color adjustment and pixel-level brightness and chroma calibration support consistent LED output.
  • USB playback: Play compatible media from a USB drive for quick testing or straightforward playback requirements.
  • Operational resilience: End-to-end backup, Ethernet-port backup testing and data retention after power loss support live-event reliability.

NovaStar VX2000 Pro Specifications

Product typeAll-in-one LED video controller and processor
LED outputs20 × Gigabit Ethernet ports
Maximum loading capacity13 million pixels
Maximum canvas width16,384 pixels
Maximum canvas height8,192 pixels
Maximum input resolution4K × 2K at 60Hz
Video inputs1 × DP 1.2, 2 × HDMI 2.0, 4 × HDMI 1.3 and 1 × 12G-SDI input with loop
SyncGenlock input and loop
Fiber ports4 × OPT ports for fiber workflows
Monitoring and audioHDMI monitoring output plus independent 3.5 mm audio input and output
Layer resourcesUp to 12 × 2K, 6 × 4K × 1K or 3 × 4K × 2K layers
Working modesVideo Controller, Fiber Converter and ByPass
Control methodsFront panel, NovaLCT, Unico web interface and VICP app
Core functionsScaling, presets, HDMI and fiber input mosaic, 3D, USB playback, low latency, output synchronization, EDID management and pixel-level calibration

How the NovaStar VX2000 Pro Works

Video Controller Mode

In Video Controller mode, the VX2000 Pro receives and processes live video sources before sending the mapped image to LED receiving cards through its Ethernet or optical output path. This mode enables layers, scaling, presets, source switching, color controls and calibration workflows.

Fiber Converter Mode

Fiber Converter mode supports long-distance optical transmission between the control position and the LED display. The four OPT ports can be integrated into adaptable fiber topologies. Confirm the required optical modules, fiber type and system direction before ordering accessories.

ByPass Mode

ByPass mode provides a direct signal-routing workflow when independent video processing is not needed. This can simplify redundancy and system-integration designs while retaining the controller’s professional connections.

Layer Formats and Large-Canvas Production

The VX2000 Pro allocates twelve 2K layer resources. A 4K × 1K layer uses two resources, while a 4K × 2K layer uses four. Therefore, a project can build up to twelve 2K layers, six dual-width layers or three full 4K layers. This flexible allocation is useful for multi-camera stages, presentations, broadcast layouts and mixed-resolution source mosaics.

For ultra-wide screens, distribute the LED load across the 20 Ethernet outputs and verify that each output stays within the receiving-card and cabling limits. Presets should be tested and saved before a live event so operators can recall approved layouts without rebuilding the canvas.

Where it fits

  • Large concert, touring and festival LED screens
  • Medium- and high-end rental LED display systems
  • Broadcast studios, control rooms and virtual production
  • Corporate events, exhibitions and product launches
  • Fine-pitch LED video walls and ultra-wide display canvases
  • Projects requiring fiber transmission, source mosaicing or system backup

Deployment Notes

Match the output resolution and Ethernet-port loading to the receiving-card configuration before connecting the screen. Use NovaLCT or the supported Unico workflow to map the LED canvas, verify signal timing and save tested presets. Firmware, software versions, optical modules, 3D accessories and cabling requirements may vary by project, so confirm compatibility with the complete LED control system before purchase.

NovaStar VX2000 Pro LED video controller front and rear panels

Frequently Asked Questions

How many pixels can the NovaStar VX2000 Pro control?

The NovaStar VX2000 Pro supports up to 13 million pixels. The maximum canvas width is 16,384 pixels and the maximum height is 8,192 pixels, subject to the total loading limit and receiving-card configuration.

How many Ethernet outputs does the VX2000 Pro have?

It has 20 Gigabit Ethernet LED outputs. These ports distribute the processed image to the LED receiving-card network.

Does the NovaStar VX2000 Pro support 4K input?

Yes. Its DP 1.2 and HDMI 2.0 inputs support video input up to 4K × 2K at 60Hz. Supported timings depend on the selected connector and EDID configuration.

How many layers does the VX2000 Pro support?

It provides twelve 2K layer resources. They can be allocated as up to twelve 2K layers, six 4K × 1K layers or three 4K × 2K layers.

What are the three VX2000 Pro working modes?

The modes are Video Controller, Fiber Converter and ByPass. Video Controller mode enables processing and LED output, Fiber Converter mode supports optical transport, and ByPass provides direct signal routing.

Can the VX2000 Pro play media from a USB drive?

Yes. The controller supports USB playback for compatible media, providing a convenient source for testing and simple playback tasks.

How does the VX2000 Pro compare with the VX1000 Pro?

The VX2000 Pro provides 20 Ethernet outputs, 13-million-pixel capacity and twelve 2K layer resources. The NovaStar VX1000 Pro provides 10 outputs, 6.5-million-pixel capacity and six layers, making it better suited to smaller canvases.

Downloads and Official Reference

Technical details were checked against NovaStar VX2000 Pro Specifications V1.0.3. Specifications, supported functions and included accessories may change with firmware or production updates; confirm current project requirements before ordering.

Will I be charged with customs and taxes?

The prices displayed on our site are tax-free in US Dollars, which means you may be liable to pay for duties and taxes once you receive your order. Import taxes, duties and related customs fees may be charged once your order arrives to its final destination, which are determined by your local customs office. Payment of these charges and taxes are your responsibility and will not be covered by us. We are not responsible for delays caused by the customs department in your country. For further details of charges, please contact your local customs office.

Weight18 kg
Shopping Cart
0
0
Your Cart
Your cart is emptyReturn to Shop
Scroll to Top