MD200PC5 200 W LED display supply
This Rong-Electric MD200PC5 page, previously described as Rongdian, retains its original product photographs and V1.0 PDF. The document has an issue date of August 13, 2015 and internal revision date of October 22, 2013. It specifies a +5 V DC supply with 0–40 A output current for LED displays.
Technical specifications
| Parameter | Specification |
|---|---|
| Output power | 200 W |
| DC output | +5.0 V; 0–40 A |
| Output voltage range | 4.9–5.1 Vdc |
| Rated AC input | 100–240 Vac |
| Operating AC input range | 90–264 Vac |
| Input frequency | 47–63 Hz |
| Maximum input current | ≤3.5 A |
| Efficiency | ≥88% at 220 Vac, full load, room temperature |
| Power factor | ≥0.95 at full load |
| Regulation accuracy | ±2% |
| Ripple and noise | ≤150 mVp-p under the documented measurement conditions |
| Operating temperature | −30 to +60°C; observe the applicable derating curve |
| Cooling | Ventilation cooling |
| Dimensions | 208 × 59 × 30 mm |
| Protection | Input undervoltage, output current limiting and short circuit |
Match the supplied revision
Use this page’s linked document when checking the stated ratings. Different MD200PC5 documents can describe different revisions, so confirm the actual nameplate and mechanical drawing before replacing an existing unit. Do not combine dimensions, efficiency or ripple values from separate revisions.
Check the cabinet’s 5 V load, AC input, terminal layout and mounting clearance. Keep airflow paths clear and apply the manufacturer’s derating guidance to the temperature inside the cabinet.
Product images
Download specification
Rong-Electric MD200PC5 High Efficiency LED Display Power Supply Specification
Frequently asked questions
What power and output current are specified here?
The original document linked on this page lists 200 W, +5 V DC and an output-current range of 0–40 A.
What dimensions does this MD200PC5 document give?
It lists 208 × 59 × 30 mm. Verify the supplied revision and mounting drawing before planning a close-fitting replacement.
What input voltage does it use?
The documented rated input is 100–240 Vac, with a 90–264 Vac operating range at 47–63 Hz.
Why might another MD200PC5 page show different figures?
Manufacturer documents may cover different revisions. This page follows its original V1.0 PDF, including ≥88% efficiency under stated conditions and ≤150 mVp-p ripple. Confirm the document that applies to your unit.
Where are the original photos and PDF?
All three original product photographs and the original specification download remain on this page.
