NDD200PS5 5V power supply for LED displays
The South Creative NDD200PS5 provides a nominal 5V DC output rated at 40A and 200W. It is intended for LED display power distribution where the module voltage, total load and installation conditions match the supply specifications.
For replacement work, compare the full NDD200PS5 model code and terminal arrangement with the existing unit. Check the AC supply and available ventilation before ordering; the model name alone does not establish compatibility with a particular LED cabinet.
Electrical specifications
The values below come from the NDD200PS5 specification, version 1.0 dated June 11, 2018, linked below.
| Parameter | Specification |
|---|---|
| Nominal DC output | 5V |
| Output current | 0–40A |
| Output power | 200W |
| Rated AC input | 100–240VAC |
| AC input range | 90–264VAC |
| Input frequency | 47–63Hz |
| Specified output voltage range | 4.9–5.1V |
| Efficiency | ≥89% at 220VAC and full load |
| Power factor | ≥0.95 at 220VAC and full load |
| Output ripple and noise | ≤200mVp-p under the specification’s test conditions |
| Protection features | Input undervoltage, output current limiting and output short circuit |
Apply the specification’s thermal derating requirements when sizing the load. Electrical ratings do not remove the need to check ambient temperature and heat dissipation in the finished cabinet.
Frequently Asked Questions
What is the output of the NDD200PS5?
Its nominal output is 5V DC, with a specified current of up to 40A and output power of 200W. Confirm the required module voltage before connecting it.
Can I use it on a 110V or 230V AC supply?
Both voltages fall within the specified rated input of 100–240VAC. Verify the actual site supply and follow the wiring and installation requirements in the PDF.
What protection functions are listed?
The specification lists input undervoltage protection, output current limiting and output short-circuit protection. These functions do not replace correct wiring or load selection.
Is 89% the power supply efficiency or an energy-saving percentage?
It is the minimum stated conversion efficiency at 220VAC and full load. It is not a claim that the display uses 89% less energy.
Where can I check the wiring and full specifications?
Use the original NDD200PS5 specification PDF below. For a replacement, also compare the terminal layout and physical fit of the existing unit; contact us with its model label if you need help identifying it.
Contact us about NDD200PS5 compatibility.
South Creative NDD200PS5 LED Display Power Supply Parameter:
Pictures of South Creative NDD200PS5 LED Display Power Supply:
Download Specification
South Creative NDD200PS5 LED Display Power Supply Specification
