Receiving Card for the ZQ-V8 Control System
The ZDEC ZQ-V8-RV01 is an LED display receiving card in the V8 control system. The system supports general-purpose constant-current driver chips, with MBI5024, MBI5026, SM16125 and ZQ9726X specifically named in the product description.
Product Specifications and Driver Support
| Parameter | Specification |
|---|---|
| Brand | ZDEC |
| Model | ZQ-V8-RV01 |
| Product type | LED display receiving card |
| Control system | ZQ-V8 / V8 |
| Driver category | General-purpose constant-current chips (pure drive) |
| Named driver ICs | MBI5024, MBI5026, SM16125 and ZQ9726X |
Check the Module Before Replacing the Receiver
Identify the driver IC on the LED module, then compare the receiver model, board revision and connector layout with your installed card. A named driver IC alone does not confirm every wiring or configuration detail of a complete display.
The available product description does not state this receiver’s pixel capacity, output-group count or supply voltage. Confirm those requirements using documentation for the exact card revision before installation. Do not substitute the specifications of a similarly named V82-series receiver.
Frequently Asked Questions
Which driver ICs are listed for the V8 system?
The named constant-current driver chips are MBI5024, MBI5026, SM16125 and ZQ9726X. Check the module wiring and receiver configuration as well as the chip model.
Is the ZQ-V8-RV01 a receiving card?
Yes. The ZQ-V8-RV01 is the receiving-card product in the ZQ-V8 display control system.
What is the ZQ-V8-RV01 pixel capacity?
The available product description does not provide a pixel-capacity figure for this receiver. Confirm the limit for the exact hardware revision and module configuration before planning the cabinet layout.
Can I use V82RV01 specifications for this card?
Do not assume that similarly named receiver models share specifications. Match the ZQ-V8-RV01 model and board revision before selecting configuration limits.
What information helps identify a replacement?
Provide the receiver model and board revision, clear photos of its connectors, the LED module driver IC and the existing display configuration. The original product photos below can help with visual comparison.
Product Images
