NovaStar CMS260 All-in-One LED Video Controller
$415.00The NovaStar CMS260 all-in-one LED video controller combines video processing and LED screen control in one unit. Four Gigabit Ethernet outputs drive up to 2.6 million pixels, while HDMI 1.3 and 3G-SDI inputs, scaling, presets and hot backup support rental, stage and fine-pitch LED display systems.
Novastar CVT-Rack310 Multi-Mode Optical Fiber Converter 300m LED Display Data Transmission
Original price was: $1,550.00.$1,473.00Current price is: $1,473.00.Novastar CVT-Rack310 multi-mode fiber converter: 16 fiber + 16 RJ45 Gigabit ports, LED display data up to 300 m over LC twin-core fiber. Plug and play.
NovaStar CVT-Rack320 Fiber Converter | 16-Channel Single-Mode 15km
Original price was: $2,250.00.$2,138.00Current price is: $2,138.00.NovaStar CVT-Rack320 is a 16-channel single-mode fiber converter that carries LED display control data across up to 15 km of optical fiber. In one rack-mount chassis it provides 16 Gigabit Ethernet RJ45 ports and 16 single-mode twin-core LC fiber connectors with factory-installed 1.25 Gbit/s, 1310 nm optical modules, converting electrical Ethernet signals to optical signals and back again.
Because all 16 channels sit in a single 19-inch rack unit and no drivers or software installation are required, the CVT-Rack320 is a practical way to link a NovaLCT control room to a distant LED screen wall, and the FX/ACT and TP/ACT indicators make it easy to confirm that every optical link is healthy.
Novastar CVT10 Pro-S/M Fiber Converter | LED Processor
$1,401.00Shop the Novastar CVT10 Pro-S/M fiber converter for LED displays. Dual 10Gb/s fiber, 10×1GbE ports, USB control and rugged rack/truss mounting. Specs and quote.
NovaStar CVT10-M Fiber Converter for LED Displays
$713.00The NovaStar CVT10-M is a multi-mode fiber converter that converts 10G optical signals to electrical signals, and Ethernet back to fiber, for connecting a sending card to an LED display over long distances. It provides 2 x 10 Gbit/s optical ports and 10 x Gigabit Ethernet ports, with hot-swappable modules, up to 300 m multi-mode reach and a half-1U chassis for rack, horizontal or suspended mounting.
NovaStar CVT10-S Fiber Converter | 10Gbps LED Display
Original price was: $850.00.$713.00Current price is: $713.00.NovaStar CVT10-S is a single-mode fiber converter for reliable, long-distance LED display signal transmission. It converts electrical Ethernet signals to optical fiber signals, or optical signals back to Ethernet, through 2 optical ports (up to 10 Gbit/s each) and 10 Gigabit Ethernet ports (up to 1 Gbit/s each).
Its full-duplex design, hot-swappable optical modules, dual power connector options and flexible mounting make it a practical choice when the LED controller and display are separated by a long distance.
NovaStar CVT310 Multimode Fiber Converter, 300 m
$97.00NovaStar CVT310 extends LED display signal links over duplex LC multimode fiber, with up to 300 m transmission. It provides one Gigabit Ethernet port and one optical port, uses AC 100–240 V power and requires no driver installation.
NovaStar CVT320 Single-Mode Ethernet to Fiber Converter
$113.00The NovaStar CVT320 is a single-mode Ethernet-to-fiber converter for long-distance LED display connections, with one Gigabit Ethernet port and one dual-core LC optical port.
- Driver-free setup; AC 100–240 V, 50/60 Hz input.
- Single-mode LC fiber connection with a factory-installed optical module.
- Confirm module version and required distance before ordering; see the 15 km / 20 km specification note below.
NovaStar CVT4K-M Fiber Converter
Original price was: $2,030.00.$1,750.00Current price is: $1,750.00.NovaStar CVT4K-M fiber converter extends LED display signals up to 300 m over multimode fiber, with 16 Neutrik RJ45 ports, 4 LC ports and dual-power redundancy.
NovaStar CVT4K-S Fiber Converter – 16-Port Optical Fiber Controller Box for Big LED Displays
Original price was: $2,030.00.$1,750.00Current price is: $1,750.00.NovaStar CVT4K-S is a 16-port fiber converter that converts the 16 Neutrik Gigabit Ethernet outputs of a NovaStar LED display controller into single-mode optical fiber, so video signals travel up to 10 km with no electromagnetic interference. Two optical ports are primary and two are hot backups, and dual internal power supplies keep large LED walls running if one power feed fails.
NovaStar CVT8-5GM Multi-Mode LED Fiber Converter
$2,194.00NovaStar CVT8-5GM is a multi-mode LED fiber converter for stable, full-duplex long-distance data transmission. It provides one 40 Gbit/s optical port, eight 5G Base-T Ethernet ports, USB Type-B control and flexible 1U rack-mount options.
NovaStar CVT8-5GS 40G Single-Mode Fiber Converter
$2,671.00The NovaStar CVT8-5GS converts optical and electrical signals for reliable LED display data transmission over single-mode fiber up to 10 km. It provides one 40G optical port, eight 5G BaseT Ethernet ports and a hot-swappable optical module.
Shopping Cart